diff options
Diffstat (limited to 'crawl-ref/source/util/pcre/pcre_dfa_exec.c')
| -rw-r--r-- | crawl-ref/source/util/pcre/pcre_dfa_exec.c | 2899 |
1 files changed, 2899 insertions, 0 deletions
diff --git a/crawl-ref/source/util/pcre/pcre_dfa_exec.c b/crawl-ref/source/util/pcre/pcre_dfa_exec.c new file mode 100644 index 0000000000..01aad5df44 --- /dev/null +++ b/crawl-ref/source/util/pcre/pcre_dfa_exec.c @@ -0,0 +1,2899 @@ +/************************************************* +* Perl-Compatible Regular Expressions * +*************************************************/ + +/* PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language. + + Written by Philip Hazel + Copyright (c) 1997-2008 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ + + +/* This module contains the external function pcre_dfa_exec(), which is an +alternative matching function that uses a sort of DFA algorithm (not a true +FSM). This is NOT Perl- compatible, but it has advantages in certain +applications. */ + + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#define NLBLOCK md /* Block containing newline information */ +#define PSSTART start_subject /* Field containing processed string start */ +#define PSEND end_subject /* Field containing processed string end */ + +#include "pcre_internal.h" + + +/* For use to indent debugging output */ + +#define SP " " + + + +/************************************************* +* Code parameters and static tables * +*************************************************/ + +/* These are offsets that are used to turn the OP_TYPESTAR and friends opcodes +into others, under special conditions. A gap of 20 between the blocks should be +enough. The resulting opcodes don't have to be less than 256 because they are +never stored, so we push them well clear of the normal opcodes. */ + +#define OP_PROP_EXTRA 300 +#define OP_EXTUNI_EXTRA 320 +#define OP_ANYNL_EXTRA 340 +#define OP_HSPACE_EXTRA 360 +#define OP_VSPACE_EXTRA 380 + + +/* This table identifies those opcodes that are followed immediately by a +character that is to be tested in some way. This makes is possible to +centralize the loading of these characters. In the case of Type * etc, the +"character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a +small value. ***NOTE*** If the start of this table is modified, the two tables +that follow must also be modified. */ + +static const uschar coptable[] = { + 0, /* End */ + 0, 0, 0, 0, 0, /* \A, \G, \K, \B, \b */ + 0, 0, 0, 0, 0, 0, /* \D, \d, \S, \s, \W, \w */ + 0, 0, 0, /* Any, AllAny, Anybyte */ + 0, 0, 0, /* NOTPROP, PROP, EXTUNI */ + 0, 0, 0, 0, 0, /* \R, \H, \h, \V, \v */ + 0, 0, 0, 0, 0, /* \Z, \z, Opt, ^, $ */ + 1, /* Char */ + 1, /* Charnc */ + 1, /* not */ + /* Positive single-char repeats */ + 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ + 3, 3, 3, /* upto, minupto, exact */ + 1, 1, 1, 3, /* *+, ++, ?+, upto+ */ + /* Negative single-char repeats - only for chars < 256 */ + 1, 1, 1, 1, 1, 1, /* NOT *, *?, +, +?, ?, ?? */ + 3, 3, 3, /* NOT upto, minupto, exact */ + 1, 1, 1, 3, /* NOT *+, ++, ?+, updo+ */ + /* Positive type repeats */ + 1, 1, 1, 1, 1, 1, /* Type *, *?, +, +?, ?, ?? */ + 3, 3, 3, /* Type upto, minupto, exact */ + 1, 1, 1, 3, /* Type *+, ++, ?+, upto+ */ + /* Character class & ref repeats */ + 0, 0, 0, 0, 0, 0, /* *, *?, +, +?, ?, ?? */ + 0, 0, /* CRRANGE, CRMINRANGE */ + 0, /* CLASS */ + 0, /* NCLASS */ + 0, /* XCLASS - variable length */ + 0, /* REF */ + 0, /* RECURSE */ + 0, /* CALLOUT */ + 0, /* Alt */ + 0, /* Ket */ + 0, /* KetRmax */ + 0, /* KetRmin */ + 0, /* Assert */ + 0, /* Assert not */ + 0, /* Assert behind */ + 0, /* Assert behind not */ + 0, /* Reverse */ + 0, 0, 0, 0, /* ONCE, BRA, CBRA, COND */ + 0, 0, 0, /* SBRA, SCBRA, SCOND */ + 0, /* CREF */ + 0, /* RREF */ + 0, /* DEF */ + 0, 0, /* BRAZERO, BRAMINZERO */ + 0, 0, 0, 0, /* PRUNE, SKIP, THEN, COMMIT */ + 0, 0, 0 /* FAIL, ACCEPT, SKIPZERO */ +}; + +/* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W, +and \w */ + +static const uschar toptable1[] = { + 0, 0, 0, 0, 0, 0, + ctype_digit, ctype_digit, + ctype_space, ctype_space, + ctype_word, ctype_word, + 0, 0 /* OP_ANY, OP_ALLANY */ +}; + +static const uschar toptable2[] = { + 0, 0, 0, 0, 0, 0, + ctype_digit, 0, + ctype_space, 0, + ctype_word, 0, + 1, 1 /* OP_ANY, OP_ALLANY */ +}; + + +/* Structure for holding data about a particular state, which is in effect the +current data for an active path through the match tree. It must consist +entirely of ints because the working vector we are passed, and which we put +these structures in, is a vector of ints. */ + +typedef struct stateblock { + int offset; /* Offset to opcode */ + int count; /* Count for repeats */ + int ims; /* ims flag bits */ + int data; /* Some use extra data */ +} stateblock; + +#define INTS_PER_STATEBLOCK (sizeof(stateblock)/sizeof(int)) + + +#ifdef DEBUG +/************************************************* +* Print character string * +*************************************************/ + +/* Character string printing function for debugging. + +Arguments: + p points to string + length number of bytes + f where to print + +Returns: nothing +*/ + +static void +pchars(unsigned char *p, int length, FILE *f) +{ +int c; +while (length-- > 0) + { + if (isprint(c = *(p++))) + fprintf(f, "%c", c); + else + fprintf(f, "\\x%02x", c); + } +} +#endif + + + +/************************************************* +* Execute a Regular Expression - DFA engine * +*************************************************/ + +/* This internal function applies a compiled pattern to a subject string, +starting at a given point, using a DFA engine. This function is called from the +external one, possibly multiple times if the pattern is not anchored. The +function calls itself recursively for some kinds of subpattern. + +Arguments: + md the match_data block with fixed information + this_start_code the opening bracket of this subexpression's code + current_subject where we currently are in the subject string + start_offset start offset in the subject string + offsets vector to contain the matching string offsets + offsetcount size of same + workspace vector of workspace + wscount size of same + ims the current ims flags + rlevel function call recursion level + recursing regex recursive call level + +Returns: > 0 => number of match offset pairs placed in offsets + = 0 => offsets overflowed; longest matches are present + -1 => failed to match + < -1 => some kind of unexpected problem + +The following macros are used for adding states to the two state vectors (one +for the current character, one for the following character). */ + +#define ADD_ACTIVE(x,y) \ + if (active_count++ < wscount) \ + { \ + next_active_state->offset = (x); \ + next_active_state->count = (y); \ + next_active_state->ims = ims; \ + next_active_state++; \ + DPRINTF(("%.*sADD_ACTIVE(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_ACTIVE_DATA(x,y,z) \ + if (active_count++ < wscount) \ + { \ + next_active_state->offset = (x); \ + next_active_state->count = (y); \ + next_active_state->ims = ims; \ + next_active_state->data = (z); \ + next_active_state++; \ + DPRINTF(("%.*sADD_ACTIVE_DATA(%d,%d,%d)\n", rlevel*2-2, SP, (x), (y), (z))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_NEW(x,y) \ + if (new_count++ < wscount) \ + { \ + next_new_state->offset = (x); \ + next_new_state->count = (y); \ + next_new_state->ims = ims; \ + next_new_state++; \ + DPRINTF(("%.*sADD_NEW(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_NEW_DATA(x,y,z) \ + if (new_count++ < wscount) \ + { \ + next_new_state->offset = (x); \ + next_new_state->count = (y); \ + next_new_state->ims = ims; \ + next_new_state->data = (z); \ + next_new_state++; \ + DPRINTF(("%.*sADD_NEW_DATA(%d,%d,%d)\n", rlevel*2-2, SP, (x), (y), (z))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +/* And now, here is the code */ + +static int +internal_dfa_exec( + dfa_match_data *md, + const uschar *this_start_code, + const uschar *current_subject, + int start_offset, + int *offsets, + int offsetcount, + int *workspace, + int wscount, + int ims, + int rlevel, + int recursing) +{ +stateblock *active_states, *new_states, *temp_states; +stateblock *next_active_state, *next_new_state; + +const uschar *ctypes, *lcc, *fcc; +const uschar *ptr; +const uschar *end_code, *first_op; + +int active_count, new_count, match_count; + +/* Some fields in the md block are frequently referenced, so we load them into +independent variables in the hope that this will perform better. */ + +const uschar *start_subject = md->start_subject; +const uschar *end_subject = md->end_subject; +const uschar *start_code = md->start_code; + +#ifdef SUPPORT_UTF8 +BOOL utf8 = (md->poptions & PCRE_UTF8) != 0; +#else +BOOL utf8 = FALSE; +#endif + +rlevel++; +offsetcount &= (-2); + +wscount -= 2; +wscount = (wscount - (wscount % (INTS_PER_STATEBLOCK * 2))) / + (2 * INTS_PER_STATEBLOCK); + +DPRINTF(("\n%.*s---------------------\n" + "%.*sCall to internal_dfa_exec f=%d r=%d\n", + rlevel*2-2, SP, rlevel*2-2, SP, rlevel, recursing)); + +ctypes = md->tables + ctypes_offset; +lcc = md->tables + lcc_offset; +fcc = md->tables + fcc_offset; + +match_count = PCRE_ERROR_NOMATCH; /* A negative number */ + +active_states = (stateblock *)(workspace + 2); +next_new_state = new_states = active_states + wscount; +new_count = 0; + +first_op = this_start_code + 1 + LINK_SIZE + + ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA)? 2:0); + +/* The first thing in any (sub) pattern is a bracket of some sort. Push all +the alternative states onto the list, and find out where the end is. This +makes is possible to use this function recursively, when we want to stop at a +matching internal ket rather than at the end. + +If the first opcode in the first alternative is OP_REVERSE, we are dealing with +a backward assertion. In that case, we have to find out the maximum amount to +move back, and set up each alternative appropriately. */ + +if (*first_op == OP_REVERSE) + { + int max_back = 0; + int gone_back; + + end_code = this_start_code; + do + { + int back = GET(end_code, 2+LINK_SIZE); + if (back > max_back) max_back = back; + end_code += GET(end_code, 1); + } + while (*end_code == OP_ALT); + + /* If we can't go back the amount required for the longest lookbehind + pattern, go back as far as we can; some alternatives may still be viable. */ + +#ifdef SUPPORT_UTF8 + /* In character mode we have to step back character by character */ + + if (utf8) + { + for (gone_back = 0; gone_back < max_back; gone_back++) + { + if (current_subject <= start_subject) break; + current_subject--; + while (current_subject > start_subject && + (*current_subject & 0xc0) == 0x80) + current_subject--; + } + } + else +#endif + + /* In byte-mode we can do this quickly. */ + + { + gone_back = (current_subject - max_back < start_subject)? + current_subject - start_subject : max_back; + current_subject -= gone_back; + } + + /* Now we can process the individual branches. */ + + end_code = this_start_code; + do + { + int back = GET(end_code, 2+LINK_SIZE); + if (back <= gone_back) + { + int bstate = end_code - start_code + 2 + 2*LINK_SIZE; + ADD_NEW_DATA(-bstate, 0, gone_back - back); + } + end_code += GET(end_code, 1); + } + while (*end_code == OP_ALT); + } + +/* This is the code for a "normal" subpattern (not a backward assertion). The +start of a whole pattern is always one of these. If we are at the top level, +we may be asked to restart matching from the same point that we reached for a +previous partial match. We still have to scan through the top-level branches to +find the end state. */ + +else + { + end_code = this_start_code; + + /* Restarting */ + + if (rlevel == 1 && (md->moptions & PCRE_DFA_RESTART) != 0) + { + do { end_code += GET(end_code, 1); } while (*end_code == OP_ALT); + new_count = workspace[1]; + if (!workspace[0]) + memcpy(new_states, active_states, new_count * sizeof(stateblock)); + } + + /* Not restarting */ + + else + { + int length = 1 + LINK_SIZE + + ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA)? 2:0); + do + { + ADD_NEW(end_code - start_code + length, 0); + end_code += GET(end_code, 1); + length = 1 + LINK_SIZE; + } + while (*end_code == OP_ALT); + } + } + +workspace[0] = 0; /* Bit indicating which vector is current */ + +DPRINTF(("%.*sEnd state = %d\n", rlevel*2-2, SP, end_code - start_code)); + +/* Loop for scanning the subject */ + +ptr = current_subject; +for (;;) + { + int i, j; + int clen, dlen; + unsigned int c, d; + + /* Make the new state list into the active state list and empty the + new state list. */ + + temp_states = active_states; + active_states = new_states; + new_states = temp_states; + active_count = new_count; + new_count = 0; + + workspace[0] ^= 1; /* Remember for the restarting feature */ + workspace[1] = active_count; + +#ifdef DEBUG + printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP); + pchars((uschar *)ptr, strlen((char *)ptr), stdout); + printf("\"\n"); + + printf("%.*sActive states: ", rlevel*2-2, SP); + for (i = 0; i < active_count; i++) + printf("%d/%d ", active_states[i].offset, active_states[i].count); + printf("\n"); +#endif + + /* Set the pointers for adding new states */ + + next_active_state = active_states + active_count; + next_new_state = new_states; + + /* Load the current character from the subject outside the loop, as many + different states may want to look at it, and we assume that at least one + will. */ + + if (ptr < end_subject) + { + clen = 1; /* Number of bytes in the character */ +#ifdef SUPPORT_UTF8 + if (utf8) { GETCHARLEN(c, ptr, clen); } else +#endif /* SUPPORT_UTF8 */ + c = *ptr; + } + else + { + clen = 0; /* This indicates the end of the subject */ + c = NOTACHAR; /* This value should never actually be used */ + } + + /* Scan up the active states and act on each one. The result of an action + may be to add more states to the currently active list (e.g. on hitting a + parenthesis) or it may be to put states on the new list, for considering + when we move the character pointer on. */ + + for (i = 0; i < active_count; i++) + { + stateblock *current_state = active_states + i; + const uschar *code; + int state_offset = current_state->offset; + int count, codevalue; +#ifdef SUPPORT_UCP + int chartype, script; +#endif + +#ifdef DEBUG + printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset); + if (clen == 0) printf("EOL\n"); + else if (c > 32 && c < 127) printf("'%c'\n", c); + else printf("0x%02x\n", c); +#endif + + /* This variable is referred to implicity in the ADD_xxx macros. */ + + ims = current_state->ims; + + /* A negative offset is a special case meaning "hold off going to this + (negated) state until the number of characters in the data field have + been skipped". */ + + if (state_offset < 0) + { + if (current_state->data > 0) + { + DPRINTF(("%.*sSkipping this character\n", rlevel*2-2, SP)); + ADD_NEW_DATA(state_offset, current_state->count, + current_state->data - 1); + continue; + } + else + { + current_state->offset = state_offset = -state_offset; + } + } + + /* Check for a duplicate state with the same count, and skip if found. */ + + for (j = 0; j < i; j++) + { + if (active_states[j].offset == state_offset && + active_states[j].count == current_state->count) + { + DPRINTF(("%.*sDuplicate state: skipped\n", rlevel*2-2, SP)); + goto NEXT_ACTIVE_STATE; + } + } + + /* The state offset is the offset to the opcode */ + + code = start_code + state_offset; + codevalue = *code; + + /* If this opcode is followed by an inline character, load it. It is + tempting to test for the presence of a subject character here, but that + is wrong, because sometimes zero repetitions of the subject are + permitted. + + We also use this mechanism for opcodes such as OP_TYPEPLUS that take an + argument that is not a data character - but is always one byte long. We + have to take special action to deal with \P, \p, \H, \h, \V, \v and \X in + this case. To keep the other cases fast, convert these ones to new opcodes. + */ + + if (coptable[codevalue] > 0) + { + dlen = 1; +#ifdef SUPPORT_UTF8 + if (utf8) { GETCHARLEN(d, (code + coptable[codevalue]), dlen); } else +#endif /* SUPPORT_UTF8 */ + d = code[coptable[codevalue]]; + if (codevalue >= OP_TYPESTAR) + { + switch(d) + { + case OP_ANYBYTE: return PCRE_ERROR_DFA_UITEM; + case OP_NOTPROP: + case OP_PROP: codevalue += OP_PROP_EXTRA; break; + case OP_ANYNL: codevalue += OP_ANYNL_EXTRA; break; + case OP_EXTUNI: codevalue += OP_EXTUNI_EXTRA; break; + case OP_NOT_HSPACE: + case OP_HSPACE: codevalue += OP_HSPACE_EXTRA; break; + case OP_NOT_VSPACE: + case OP_VSPACE: codevalue += OP_VSPACE_EXTRA; break; + default: break; + } + } + } + else + { + dlen = 0; /* Not strictly necessary, but compilers moan */ + d = NOTACHAR; /* if these variables are not set. */ + } + + + /* Now process the individual opcodes */ + + switch (codevalue) + { + +/* ========================================================================== */ + /* Reached a closing bracket. If not at the end of the pattern, carry + on with the next opcode. Otherwise, unless we have an empty string and + PCRE_NOTEMPTY is set, save the match data, shifting up all previous + matches so we always have the longest first. */ + + case OP_KET: + case OP_KETRMIN: + case OP_KETRMAX: + if (code != end_code) + { + ADD_ACTIVE(state_offset + 1 + LINK_SIZE, 0); + if (codevalue != OP_KET) + { + ADD_ACTIVE(state_offset - GET(code, 1), 0); + } + } + else if (ptr > current_subject || (md->moptions & PCRE_NOTEMPTY) == 0) + { + if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0; + else if (match_count > 0 && ++match_count * 2 >= offsetcount) + match_count = 0; + count = ((match_count == 0)? offsetcount : match_count * 2) - 2; + if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int)); + if (offsetcount >= 2) + { + offsets[0] = current_subject - start_subject; + offsets[1] = ptr - start_subject; + DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP, + offsets[1] - offsets[0], current_subject)); + } + if ((md->moptions & PCRE_DFA_SHORTEST) != 0) + { + DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" + "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, + match_count, rlevel*2-2, SP)); + return match_count; + } + } + break; + +/* ========================================================================== */ + /* These opcodes add to the current list of states without looking + at the current character. */ + + /*-----------------------------------------------------------------*/ + case OP_ALT: + do { code += GET(code, 1); } while (*code == OP_ALT); + ADD_ACTIVE(code - start_code, 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_BRA: + case OP_SBRA: + do + { + ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0); + code += GET(code, 1); + } + while (*code == OP_ALT); + break; + + /*-----------------------------------------------------------------*/ + case OP_CBRA: + case OP_SCBRA: + ADD_ACTIVE(code - start_code + 3 + LINK_SIZE, 0); + code += GET(code, 1); + while (*code == OP_ALT) + { + ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0); + code += GET(code, 1); + } + break; + + /*-----------------------------------------------------------------*/ + case OP_BRAZERO: + case OP_BRAMINZERO: + ADD_ACTIVE(state_offset + 1, 0); + code += 1 + GET(code, 2); + while (*code == OP_ALT) code += GET(code, 1); + ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_SKIPZERO: + code += 1 + GET(code, 2); + while (*code == OP_ALT) code += GET(code, 1); + ADD_ACTIVE(code - start_code + 1 + LINK_SIZE, 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_CIRC: + if ((ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) || + ((ims & PCRE_MULTILINE) != 0 && + ptr != end_subject && + WAS_NEWLINE(ptr))) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_EOD: + if (ptr >= end_subject) { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_OPT: + ims = code[1]; + ADD_ACTIVE(state_offset + 2, 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_SOD: + if (ptr == start_subject) { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_SOM: + if (ptr == start_subject + start_offset) { ADD_ACTIVE(state_offset + 1, 0); } + break; + + +/* ========================================================================== */ + /* These opcodes inspect the next subject character, and sometimes + the previous one as well, but do not have an argument. The variable + clen contains the length of the current character and is zero if we are + at the end of the subject. */ + + /*-----------------------------------------------------------------*/ + case OP_ANY: + if (clen > 0 && !IS_NEWLINE(ptr)) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_ALLANY: + if (clen > 0) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_EODN: + if (clen == 0 || (IS_NEWLINE(ptr) && ptr == end_subject - md->nllen)) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_DOLL: + if ((md->moptions & PCRE_NOTEOL) == 0) + { + if (clen == 0 || + (IS_NEWLINE(ptr) && + ((ims & PCRE_MULTILINE) != 0 || ptr == end_subject - md->nllen) + )) + { ADD_ACTIVE(state_offset + 1, 0); } + } + else if ((ims & PCRE_MULTILINE) != 0 && IS_NEWLINE(ptr)) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + + case OP_DIGIT: + case OP_WHITESPACE: + case OP_WORDCHAR: + if (clen > 0 && c < 256 && + ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_DIGIT: + case OP_NOT_WHITESPACE: + case OP_NOT_WORDCHAR: + if (clen > 0 && (c >= 256 || + ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0)) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_WORD_BOUNDARY: + case OP_NOT_WORD_BOUNDARY: + { + int left_word, right_word; + + if (ptr > start_subject) + { + const uschar *temp = ptr - 1; +#ifdef SUPPORT_UTF8 + if (utf8) BACKCHAR(temp); +#endif + GETCHARTEST(d, temp); + left_word = d < 256 && (ctypes[d] & ctype_word) != 0; + } + else left_word = 0; + + if (clen > 0) right_word = c < 256 && (ctypes[c] & ctype_word) != 0; + else right_word = 0; + + if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY)) + { ADD_ACTIVE(state_offset + 1, 0); } + } + break; + + + /*-----------------------------------------------------------------*/ + /* Check the next character by Unicode property. We will get here only + if the support is in the binary; otherwise a compile-time error occurs. + */ + +#ifdef SUPPORT_UCP + case OP_PROP: + case OP_NOTPROP: + if (clen > 0) + { + BOOL OK; + int category = _pcre_ucp_findprop(c, &chartype, &script); + switch(code[1]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = chartype == ucp_Lu || chartype == ucp_Ll || chartype == ucp_Lt; + break; + + case PT_GC: + OK = category == code[2]; + break; + + case PT_PC: + OK = chartype == code[2]; + break; + + case PT_SC: + OK = script == code[2]; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (codevalue == OP_PROP)) { ADD_NEW(state_offset + 3, 0); } + } + break; +#endif + + + +/* ========================================================================== */ + /* These opcodes likewise inspect the subject character, but have an + argument that is not a data character. It is one of these opcodes: + OP_ANY, OP_ALLANY, OP_DIGIT, OP_NOT_DIGIT, OP_WHITESPACE, OP_NOT_SPACE, + OP_WORDCHAR, OP_NOT_WORDCHAR. The value is loaded into d. */ + + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (count > 0 && codevalue == OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + case OP_TYPEPOSQUERY: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + 2, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPOSSTAR: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSSTAR) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEEXACT: + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (++count >= GET2(code, 1)) + { ADD_NEW(state_offset + 4, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + case OP_TYPEPOSUPTO: + ADD_ACTIVE(state_offset + 4, 0); + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW(state_offset + 4, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + +/* ========================================================================== */ + /* These are virtual opcodes that are used when something like + OP_TYPEPLUS has OP_PROP, OP_NOTPROP, OP_ANYNL, or OP_EXTUNI as its + argument. It keeps the code above fast for the other cases. The argument + is in the d variable. */ + +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEPLUS: + case OP_PROP_EXTRA + OP_TYPEMINPLUS: + case OP_PROP_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 4, 0); } + if (clen > 0) + { + BOOL OK; + int category = _pcre_ucp_findprop(c, &chartype, &script); + switch(code[2]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = chartype == ucp_Lu || chartype == ucp_Ll || chartype == ucp_Lt; + break; + + case PT_GC: + OK = category == code[3]; + break; + + case PT_PC: + OK = chartype == code[3]; + break; + + case PT_SC: + OK = script == code[3]; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (count > 0 && codevalue == OP_PROP_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEPLUS: + case OP_EXTUNI_EXTRA + OP_TYPEMINPLUS: + case OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0 && _pcre_ucp_findprop(c, &chartype, &script) != ucp_M) + { + const uschar *nptr = ptr + clen; + int ncount = 0; + if (count > 0 && codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + while (nptr < end_subject) + { + int nd; + int ndlen = 1; + GETCHARLEN(nd, nptr, ndlen); + if (_pcre_ucp_findprop(nd, &chartype, &script) != ucp_M) break; + ncount++; + nptr += ndlen; + } + count++; + ADD_NEW_DATA(-state_offset, count, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEPLUS: + case OP_ANYNL_EXTRA + OP_TYPEMINPLUS: + case OP_ANYNL_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL01; + + case 0x000d: + if (ptr + 1 < end_subject && ptr[1] == 0x0a) ncount = 1; + /* Fall through */ + + ANYNL01: + case 0x000a: + if (count > 0 && codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, ncount); + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEPLUS: + case OP_VSPACE_EXTRA + OP_TYPEMINPLUS: + case OP_VSPACE_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x000a: + case 0x000b: + case 0x000c: + case 0x000d: + case 0x0085: + case 0x2028: + case 0x2029: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_VSPACE)) + { + if (count > 0 && codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEPLUS: + case OP_HSPACE_EXTRA + OP_TYPEMINPLUS: + case OP_HSPACE_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (count > 0 && codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEQUERY: + case OP_PROP_EXTRA + OP_TYPEMINQUERY: + case OP_PROP_EXTRA + OP_TYPEPOSQUERY: + count = 4; + goto QS1; + + case OP_PROP_EXTRA + OP_TYPESTAR: + case OP_PROP_EXTRA + OP_TYPEMINSTAR: + case OP_PROP_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS1: + + ADD_ACTIVE(state_offset + 4, 0); + if (clen > 0) + { + BOOL OK; + int category = _pcre_ucp_findprop(c, &chartype, &script); + switch(code[2]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = chartype == ucp_Lu || chartype == ucp_Ll || chartype == ucp_Lt; + break; + + case PT_GC: + OK = category == code[3]; + break; + + case PT_PC: + OK = chartype == code[3]; + break; + + case PT_SC: + OK = script == code[3]; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_PROP_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEQUERY: + case OP_EXTUNI_EXTRA + OP_TYPEMINQUERY: + case OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS2; + + case OP_EXTUNI_EXTRA + OP_TYPESTAR: + case OP_EXTUNI_EXTRA + OP_TYPEMINSTAR: + case OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS2: + + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0 && _pcre_ucp_findprop(c, &chartype, &script) != ucp_M) + { + const uschar *nptr = ptr + clen; + int ncount = 0; + if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + while (nptr < end_subject) + { + int nd; + int ndlen = 1; + GETCHARLEN(nd, nptr, ndlen); + if (_pcre_ucp_findprop(nd, &chartype, &script) != ucp_M) break; + ncount++; + nptr += ndlen; + } + ADD_NEW_DATA(-(state_offset + count), 0, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEQUERY: + case OP_ANYNL_EXTRA + OP_TYPEMINQUERY: + case OP_ANYNL_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS3; + + case OP_ANYNL_EXTRA + OP_TYPESTAR: + case OP_ANYNL_EXTRA + OP_TYPEMINSTAR: + case OP_ANYNL_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS3: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL02; + + case 0x000d: + if (ptr + 1 < end_subject && ptr[1] == 0x0a) ncount = 1; + /* Fall through */ + + ANYNL02: + case 0x000a: + if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + count), 0, ncount); + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEQUERY: + case OP_VSPACE_EXTRA + OP_TYPEMINQUERY: + case OP_VSPACE_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS4; + + case OP_VSPACE_EXTRA + OP_TYPESTAR: + case OP_VSPACE_EXTRA + OP_TYPEMINSTAR: + case OP_VSPACE_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS4: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x000a: + case 0x000b: + case 0x000c: + case 0x000d: + case 0x0085: + case 0x2028: + case 0x2029: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + if (OK == (d == OP_VSPACE)) + { + if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + count), 0, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEQUERY: + case OP_HSPACE_EXTRA + OP_TYPEMINQUERY: + case OP_HSPACE_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS5; + + case OP_HSPACE_EXTRA + OP_TYPESTAR: + case OP_HSPACE_EXTRA + OP_TYPEMINSTAR: + case OP_HSPACE_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS5: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + count), 0, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEEXACT: + case OP_PROP_EXTRA + OP_TYPEUPTO: + case OP_PROP_EXTRA + OP_TYPEMINUPTO: + case OP_PROP_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_PROP_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 6, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + int category = _pcre_ucp_findprop(c, &chartype, &script); + switch(code[4]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = chartype == ucp_Lu || chartype == ucp_Ll || chartype == ucp_Lt; + break; + + case PT_GC: + OK = category == code[5]; + break; + + case PT_PC: + OK = chartype == code[5]; + break; + + case PT_SC: + OK = script == code[5]; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW(state_offset + 6, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEEXACT: + case OP_EXTUNI_EXTRA + OP_TYPEUPTO: + case OP_EXTUNI_EXTRA + OP_TYPEMINUPTO: + case OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_EXTUNI_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 4, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0 && _pcre_ucp_findprop(c, &chartype, &script) != ucp_M) + { + const uschar *nptr = ptr + clen; + int ncount = 0; + if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + while (nptr < end_subject) + { + int nd; + int ndlen = 1; + GETCHARLEN(nd, nptr, ndlen); + if (_pcre_ucp_findprop(nd, &chartype, &script) != ucp_M) break; + ncount++; + nptr += ndlen; + } + if (++count >= GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 4), 0, ncount); } + else + { ADD_NEW_DATA(-state_offset, count, ncount); } + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEEXACT: + case OP_ANYNL_EXTRA + OP_TYPEUPTO: + case OP_ANYNL_EXTRA + OP_TYPEMINUPTO: + case OP_ANYNL_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_ANYNL_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 4, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL03; + + case 0x000d: + if (ptr + 1 < end_subject && ptr[1] == 0x0a) ncount = 1; + /* Fall through */ + + ANYNL03: + case 0x000a: + if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 4), 0, ncount); } + else + { ADD_NEW_DATA(-state_offset, count, ncount); } + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEEXACT: + case OP_VSPACE_EXTRA + OP_TYPEUPTO: + case OP_VSPACE_EXTRA + OP_TYPEMINUPTO: + case OP_VSPACE_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_VSPACE_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 4, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x000a: + case 0x000b: + case 0x000c: + case 0x000d: + case 0x0085: + case 0x2028: + case 0x2029: + OK = TRUE; + break; + + default: + OK = FALSE; + } + + if (OK == (d == OP_VSPACE)) + { + if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 4), 0, 0); } + else + { ADD_NEW_DATA(-state_offset, count, 0); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEEXACT: + case OP_HSPACE_EXTRA + OP_TYPEUPTO: + case OP_HSPACE_EXTRA + OP_TYPEMINUPTO: + case OP_HSPACE_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_HSPACE_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 4, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + switch (c) + { + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 4), 0, 0); } + else + { ADD_NEW_DATA(-state_offset, count, 0); } + } + } + break; + +/* ========================================================================== */ + /* These opcodes are followed by a character that is usually compared + to the current subject character; it is loaded into d. We still get + here even if there is no subject character, because in some cases zero + repetitions are permitted. */ + + /*-----------------------------------------------------------------*/ + case OP_CHAR: + if (clen > 0 && c == d) { ADD_NEW(state_offset + dlen + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_CHARNC: + if (clen == 0) break; + +#ifdef SUPPORT_UTF8 + if (utf8) + { + if (c == d) { ADD_NEW(state_offset + dlen + 1, 0); } else + { + unsigned int othercase; + if (c < 128) othercase = fcc[c]; else + + /* If we have Unicode property support, we can use it to test the + other case of the character. */ + +#ifdef SUPPORT_UCP + othercase = _pcre_ucp_othercase(c); +#else + othercase = NOTACHAR; +#endif + + if (d == othercase) { ADD_NEW(state_offset + dlen + 1, 0); } + } + } + else +#endif /* SUPPORT_UTF8 */ + + /* Non-UTF-8 mode */ + { + if (lcc[c] == lcc[d]) { ADD_NEW(state_offset + 2, 0); } + } + break; + + +#ifdef SUPPORT_UCP + /*-----------------------------------------------------------------*/ + /* This is a tricky one because it can match more than one character. + Find out how many characters to skip, and then set up a negative state + to wait for them to pass before continuing. */ + + case OP_EXTUNI: + if (clen > 0 && _pcre_ucp_findprop(c, &chartype, &script) != ucp_M) + { + const uschar *nptr = ptr + clen; + int ncount = 0; + while (nptr < end_subject) + { + int nclen = 1; + GETCHARLEN(c, nptr, nclen); + if (_pcre_ucp_findprop(c, &chartype, &script) != ucp_M) break; + ncount++; + nptr += nclen; + } + ADD_NEW_DATA(-(state_offset + 1), 0, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + /* This is a tricky like EXTUNI because it too can match more than one + character (when CR is followed by LF). In this case, set up a negative + state to wait for one character to pass before continuing. */ + + case OP_ANYNL: + if (clen > 0) switch(c) + { + case 0x000b: + case 0x000c: + case 0x0085: + case 0x2028: + case 0x2029: + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + + case 0x000a: + ADD_NEW(state_offset + 1, 0); + break; + + case 0x000d: + if (ptr + 1 < end_subject && ptr[1] == 0x0a) + { + ADD_NEW_DATA(-(state_offset + 1), 0, 1); + } + else + { + ADD_NEW(state_offset + 1, 0); + } + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_VSPACE: + if (clen > 0) switch(c) + { + case 0x000a: + case 0x000b: + case 0x000c: + case 0x000d: + case 0x0085: + case 0x2028: + case 0x2029: + break; + + default: + ADD_NEW(state_offset + 1, 0); + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE: + if (clen > 0) switch(c) + { + case 0x000a: + case 0x000b: + case 0x000c: + case 0x000d: + case 0x0085: + case 0x2028: + case 0x2029: + ADD_NEW(state_offset + 1, 0); + break; + + default: break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_HSPACE: + if (clen > 0) switch(c) + { + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + break; + + default: + ADD_NEW(state_offset + 1, 0); + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE: + if (clen > 0) switch(c) + { + case 0x09: /* HT */ + case 0x20: /* SPACE */ + case 0xa0: /* NBSP */ + case 0x1680: /* OGHAM SPACE MARK */ + case 0x180e: /* MONGOLIAN VOWEL SEPARATOR */ + case 0x2000: /* EN QUAD */ + case 0x2001: /* EM QUAD */ + case 0x2002: /* EN SPACE */ + case 0x2003: /* EM SPACE */ + case 0x2004: /* THREE-PER-EM SPACE */ + case 0x2005: /* FOUR-PER-EM SPACE */ + case 0x2006: /* SIX-PER-EM SPACE */ + case 0x2007: /* FIGURE SPACE */ + case 0x2008: /* PUNCTUATION SPACE */ + case 0x2009: /* THIN SPACE */ + case 0x200A: /* HAIR SPACE */ + case 0x202f: /* NARROW NO-BREAK SPACE */ + case 0x205f: /* MEDIUM MATHEMATICAL SPACE */ + case 0x3000: /* IDEOGRAPHIC SPACE */ + ADD_NEW(state_offset + 1, 0); + break; + } + break; + + /*-----------------------------------------------------------------*/ + /* Match a negated single character. This is only used for one-byte + characters, that is, we know that d < 256. The character we are + checking (c) can be multibyte. */ + + case OP_NOT: + if (clen > 0) + { + unsigned int otherd = ((ims & PCRE_CASELESS) != 0)? fcc[d] : d; + if (c != d && c != otherd) { ADD_NEW(state_offset + dlen + 1, 0); } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_PLUS: + case OP_MINPLUS: + case OP_POSPLUS: + case OP_NOTPLUS: + case OP_NOTMINPLUS: + case OP_NOTPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + dlen + 1, 0); } + if (clen > 0) + { + unsigned int otherd = NOTACHAR; + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (utf8 && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = _pcre_ucp_othercase(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF8 */ + otherd = fcc[d]; + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (count > 0 && + (codevalue == OP_POSPLUS || codevalue == OP_NOTPOSPLUS)) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_QUERY: + case OP_MINQUERY: + case OP_POSQUERY: + case OP_NOTQUERY: + case OP_NOTMINQUERY: + case OP_NOTPOSQUERY: + ADD_ACTIVE(state_offset + dlen + 1, 0); + if (clen > 0) + { + unsigned int otherd = NOTACHAR; + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (utf8 && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = _pcre_ucp_othercase(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF8 */ + otherd = fcc[d]; + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSQUERY || codevalue == OP_NOTPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + dlen + 1, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_STAR: + case OP_MINSTAR: + case OP_POSSTAR: + case OP_NOTSTAR: + case OP_NOTMINSTAR: + case OP_NOTPOSSTAR: + ADD_ACTIVE(state_offset + dlen + 1, 0); + if (clen > 0) + { + unsigned int otherd = NOTACHAR; + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (utf8 && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = _pcre_ucp_othercase(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF8 */ + otherd = fcc[d]; + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSSTAR || codevalue == OP_NOTPOSSTAR) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXACT: + case OP_NOTEXACT: + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + unsigned int otherd = NOTACHAR; + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (utf8 && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = _pcre_ucp_othercase(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF8 */ + otherd = fcc[d]; + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (++count >= GET2(code, 1)) + { ADD_NEW(state_offset + dlen + 3, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_UPTO: + case OP_MINUPTO: + case OP_POSUPTO: + case OP_NOTUPTO: + case OP_NOTMINUPTO: + case OP_NOTPOSUPTO: + ADD_ACTIVE(state_offset + dlen + 3, 0); + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + unsigned int otherd = NOTACHAR; + if ((ims & PCRE_CASELESS) != 0) + { +#ifdef SUPPORT_UTF8 + if (utf8 && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = _pcre_ucp_othercase(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF8 */ + otherd = fcc[d]; + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSUPTO || codevalue == OP_NOTPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= GET2(code, 1)) + { ADD_NEW(state_offset + dlen + 3, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + +/* ========================================================================== */ + /* These are the class-handling opcodes */ + + case OP_CLASS: + case OP_NCLASS: + case OP_XCLASS: + { + BOOL isinclass = FALSE; + int next_state_offset; + const uschar *ecode; + + /* For a simple class, there is always just a 32-byte table, and we + can set isinclass from it. */ + + if (codevalue != OP_XCLASS) + { + ecode = code + 33; + if (clen > 0) + { + isinclass = (c > 255)? (codevalue == OP_NCLASS) : + ((code[1 + c/8] & (1 << (c&7))) != 0); + } + } + + /* An extended class may have a table or a list of single characters, + ranges, or both, and it may be positive or negative. There's a + function that sorts all this out. */ + + else + { + ecode = code + GET(code, 1); + if (clen > 0) isinclass = _pcre_xclass(c, code + 1 + LINK_SIZE); + } + + /* At this point, isinclass is set for all kinds of class, and ecode + points to the byte after the end of the class. If there is a + quantifier, this is where it will be. */ + + next_state_offset = ecode - start_code; + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + ADD_ACTIVE(next_state_offset + 1, 0); + if (isinclass) { ADD_NEW(state_offset, 0); } + break; + + case OP_CRPLUS: + case OP_CRMINPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(next_state_offset + 1, 0); } + if (isinclass) { count++; ADD_NEW(state_offset, count); } + break; + + case OP_CRQUERY: + case OP_CRMINQUERY: + ADD_ACTIVE(next_state_offset + 1, 0); + if (isinclass) { ADD_NEW(next_state_offset + 1, 0); } + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + count = current_state->count; /* Already matched */ + if (count >= GET2(ecode, 1)) + { ADD_ACTIVE(next_state_offset + 5, 0); } + if (isinclass) + { + int max = GET2(ecode, 3); + if (++count >= max && max != 0) /* Max 0 => no limit */ + { ADD_NEW(next_state_offset + 5, 0); } + else + { ADD_NEW(state_offset, count); } + } + break; + + default: + if (isinclass) { ADD_NEW(next_state_offset, 0); } + break; + } + } + break; + +/* ========================================================================== */ + /* These are the opcodes for fancy brackets of various kinds. We have + to use recursion in order to handle them. The "always failing" assersion + (?!) is optimised when compiling to OP_FAIL, so we have to support that, + though the other "backtracking verbs" are not supported. */ + + case OP_FAIL: + break; + + case OP_ASSERT: + case OP_ASSERT_NOT: + case OP_ASSERTBACK: + case OP_ASSERTBACK_NOT: + { + int rc; + int local_offsets[2]; + int local_workspace[1000]; + const uschar *endasscode = code + GET(code, 1); + + while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); + + rc = internal_dfa_exec( + md, /* static match data */ + code, /* this subexpression's code */ + ptr, /* where we currently are */ + ptr - start_subject, /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + ims, /* the current ims flags */ + rlevel, /* function recursion level */ + recursing); /* pass on regex recursion */ + + if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK)) + { ADD_ACTIVE(endasscode + LINK_SIZE + 1 - start_code, 0); } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_COND: + case OP_SCOND: + { + int local_offsets[1000]; + int local_workspace[1000]; + int condcode = code[LINK_SIZE+1]; + + /* Back reference conditions are not supported */ + + if (condcode == OP_CREF) return PCRE_ERROR_DFA_UCOND; + + /* The DEFINE condition is always false */ + + if (condcode == OP_DEF) + { + ADD_ACTIVE(state_offset + GET(code, 1) + LINK_SIZE + 1, 0); + } + + /* The only supported version of OP_RREF is for the value RREF_ANY, + which means "test if in any recursion". We can't test for specifically + recursed groups. */ + + else if (condcode == OP_RREF) + { + int value = GET2(code, LINK_SIZE+2); + if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND; + if (recursing > 0) { ADD_ACTIVE(state_offset + LINK_SIZE + 4, 0); } + else { ADD_ACTIVE(state_offset + GET(code, 1) + LINK_SIZE + 1, 0); } + } + + /* Otherwise, the condition is an assertion */ + + else + { + int rc; + const uschar *asscode = code + LINK_SIZE + 1; + const uschar *endasscode = asscode + GET(asscode, 1); + + while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); + + rc = internal_dfa_exec( + md, /* fixed match data */ + asscode, /* this subexpression's code */ + ptr, /* where we currently are */ + ptr - start_subject, /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + ims, /* the current ims flags */ + rlevel, /* function recursion level */ + recursing); /* pass on regex recursion */ + + if ((rc >= 0) == + (condcode == OP_ASSERT || condcode == OP_ASSERTBACK)) + { ADD_ACTIVE(endasscode + LINK_SIZE + 1 - start_code, 0); } + else + { ADD_ACTIVE(state_offset + GET(code, 1) + LINK_SIZE + 1, 0); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_RECURSE: + { + int local_offsets[1000]; + int local_workspace[1000]; + int rc; + + DPRINTF(("%.*sStarting regex recursion %d\n", rlevel*2-2, SP, + recursing + 1)); + + rc = internal_dfa_exec( + md, /* fixed match data */ + start_code + GET(code, 1), /* this subexpression's code */ + ptr, /* where we currently are */ + ptr - start_subject, /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + ims, /* the current ims flags */ + rlevel, /* function recursion level */ + recursing + 1); /* regex recurse level */ + + DPRINTF(("%.*sReturn from regex recursion %d: rc=%d\n", rlevel*2-2, SP, + recursing + 1, rc)); + + /* Ran out of internal offsets */ + + if (rc == 0) return PCRE_ERROR_DFA_RECURSE; + + /* For each successful matched substring, set up the next state with a + count of characters to skip before trying it. Note that the count is in + characters, not bytes. */ + + if (rc > 0) + { + for (rc = rc*2 - 2; rc >= 0; rc -= 2) + { + const uschar *p = start_subject + local_offsets[rc]; + const uschar *pp = start_subject + local_offsets[rc+1]; + int charcount = local_offsets[rc+1] - local_offsets[rc]; + while (p < pp) if ((*p++ & 0xc0) == 0x80) charcount--; + if (charcount > 0) + { + ADD_NEW_DATA(-(state_offset + LINK_SIZE + 1), 0, (charcount - 1)); + } + else + { + ADD_ACTIVE(state_offset + LINK_SIZE + 1, 0); + } + } + } + else if (rc != PCRE_ERROR_NOMATCH) return rc; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_ONCE: + { + int local_offsets[2]; + int local_workspace[1000]; + + int rc = internal_dfa_exec( + md, /* fixed match data */ + code, /* this subexpression's code */ + ptr, /* where we currently are */ + ptr - start_subject, /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + ims, /* the current ims flags */ + rlevel, /* function recursion level */ + recursing); /* pass on regex recursion */ + + if (rc >= 0) + { + const uschar *end_subpattern = code; + int charcount = local_offsets[1] - local_offsets[0]; + int next_state_offset, repeat_state_offset; + + do { end_subpattern += GET(end_subpattern, 1); } + while (*end_subpattern == OP_ALT); + next_state_offset = end_subpattern - start_code + LINK_SIZE + 1; + + /* If the end of this subpattern is KETRMAX or KETRMIN, we must + arrange for the repeat state also to be added to the relevant list. + Calculate the offset, or set -1 for no repeat. */ + + repeat_state_offset = (*end_subpattern == OP_KETRMAX || + *end_subpattern == OP_KETRMIN)? + end_subpattern - start_code - GET(end_subpattern, 1) : -1; + + /* If we have matched an empty string, add the next state at the + current character pointer. This is important so that the duplicate + checking kicks in, which is what breaks infinite loops that match an + empty string. */ + + if (charcount == 0) + { + ADD_ACTIVE(next_state_offset, 0); + } + + /* Optimization: if there are no more active states, and there + are no new states yet set up, then skip over the subject string + right here, to save looping. Otherwise, set up the new state to swing + into action when the end of the substring is reached. */ + + else if (i + 1 >= active_count && new_count == 0) + { + ptr += charcount; + clen = 0; + ADD_NEW(next_state_offset, 0); + + /* If we are adding a repeat state at the new character position, + we must fudge things so that it is the only current state. + Otherwise, it might be a duplicate of one we processed before, and + that would cause it to be skipped. */ + + if (repeat_state_offset >= 0) + { + next_active_state = active_states; + active_count = 0; + i = -1; + ADD_ACTIVE(repeat_state_offset, 0); + } + } + else + { + const uschar *p = start_subject + local_offsets[0]; + const uschar *pp = start_subject + local_offsets[1]; + while (p < pp) if ((*p++ & 0xc0) == 0x80) charcount--; + ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1)); + if (repeat_state_offset >= 0) + { ADD_NEW_DATA(-repeat_state_offset, 0, (charcount - 1)); } + } + + } + else if (rc != PCRE_ERROR_NOMATCH) return rc; + } + break; + + +/* ========================================================================== */ + /* Handle callouts */ + + case OP_CALLOUT: + if (pcre_callout != NULL) + { + int rrc; + pcre_callout_block cb; + cb.version = 1; /* Version 1 of the callout block */ + cb.callout_number = code[1]; + cb.offset_vector = offsets; + cb.subject = (PCRE_SPTR)start_subject; + cb.subject_length = end_subject - start_subject; + cb.start_match = current_subject - start_subject; + cb.current_position = ptr - start_subject; + cb.pattern_position = GET(code, 2); + cb.next_item_length = GET(code, 2 + LINK_SIZE); + cb.capture_top = 1; + cb.capture_last = -1; + cb.callout_data = md->callout_data; + if ((rrc = (*pcre_callout)(&cb)) < 0) return rrc; /* Abandon */ + if (rrc == 0) { ADD_ACTIVE(state_offset + 2 + 2*LINK_SIZE, 0); } + } + break; + + +/* ========================================================================== */ + default: /* Unsupported opcode */ + return PCRE_ERROR_DFA_UITEM; + } + + NEXT_ACTIVE_STATE: continue; + + } /* End of loop scanning active states */ + + /* We have finished the processing at the current subject character. If no + new states have been set for the next character, we have found all the + matches that we are going to find. If we are at the top level and partial + matching has been requested, check for appropriate conditions. */ + + if (new_count <= 0) + { + if (match_count < 0 && /* No matches found */ + rlevel == 1 && /* Top level match function */ + (md->moptions & PCRE_PARTIAL) != 0 && /* Want partial matching */ + ptr >= end_subject && /* Reached end of subject */ + ptr > current_subject) /* Matched non-empty string */ + { + if (offsetcount >= 2) + { + offsets[0] = current_subject - start_subject; + offsets[1] = end_subject - start_subject; + } + match_count = PCRE_ERROR_PARTIAL; + } + + DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" + "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, match_count, + rlevel*2-2, SP)); + break; /* In effect, "return", but see the comment below */ + } + + /* One or more states are active for the next character. */ + + ptr += clen; /* Advance to next subject character */ + } /* Loop to move along the subject string */ + +/* Control gets here from "break" a few lines above. We do it this way because +if we use "return" above, we have compiler trouble. Some compilers warn if +there's nothing here because they think the function doesn't return a value. On +the other hand, if we put a dummy statement here, some more clever compilers +complain that it can't be reached. Sigh. */ + +return match_count; +} + + + + +/************************************************* +* Execute a Regular Expression - DFA engine * +*************************************************/ + +/* This external function applies a compiled re to a subject string using a DFA +engine. This function calls the internal function multiple times if the pattern +is not anchored. + +Arguments: + argument_re points to the compiled expression + extra_data points to extra data or is NULL + subject points to the subject string + length length of subject string (may contain binary zeros) + start_offset where to start in the subject string + options option bits + offsets vector of match offsets + offsetcount size of same + workspace workspace vector + wscount size of same + +Returns: > 0 => number of match offset pairs placed in offsets + = 0 => offsets overflowed; longest matches are present + -1 => failed to match + < -1 => some kind of unexpected problem +*/ + +PCRE_EXP_DEFN int +pcre_dfa_exec(const pcre *argument_re, const pcre_extra *extra_data, + const char *subject, int length, int start_offset, int options, int *offsets, + int offsetcount, int *workspace, int wscount) +{ +real_pcre *re = (real_pcre *)argument_re; +dfa_match_data match_block; +dfa_match_data *md = &match_block; +BOOL utf8, anchored, startline, firstline; +const uschar *current_subject, *end_subject, *lcc; + +pcre_study_data internal_study; +const pcre_study_data *study = NULL; +real_pcre internal_re; + +const uschar *req_byte_ptr; +const uschar *start_bits = NULL; +BOOL first_byte_caseless = FALSE; +BOOL req_byte_caseless = FALSE; +int first_byte = -1; +int req_byte = -1; +int req_byte2 = -1; +int newline; + +/* Plausibility checks */ + +if ((options & ~PUBLIC_DFA_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; +if (re == NULL || subject == NULL || workspace == NULL || + (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; +if (offsetcount < 0) return PCRE_ERROR_BADCOUNT; +if (wscount < 20) return PCRE_ERROR_DFA_WSSIZE; + +/* We need to find the pointer to any study data before we test for byte +flipping, so we scan the extra_data block first. This may set two fields in the +match block, so we must initialize them beforehand. However, the other fields +in the match block must not be set until after the byte flipping. */ + +md->tables = re->tables; +md->callout_data = NULL; + +if (extra_data != NULL) + { + unsigned int flags = extra_data->flags; + if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) + study = (const pcre_study_data *)extra_data->study_data; + if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) return PCRE_ERROR_DFA_UMLIMIT; + if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0) + return PCRE_ERROR_DFA_UMLIMIT; + if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) + md->callout_data = extra_data->callout_data; + if ((flags & PCRE_EXTRA_TABLES) != 0) + md->tables = extra_data->tables; + } + +/* Check that the first field in the block is the magic number. If it is not, +test for a regex that was compiled on a host of opposite endianness. If this is +the case, flipped values are put in internal_re and internal_study if there was +study data too. */ + +if (re->magic_number != MAGIC_NUMBER) + { + re = _pcre_try_flipped(re, &internal_re, study, &internal_study); + if (re == NULL) return PCRE_ERROR_BADMAGIC; + if (study != NULL) study = &internal_study; + } + +/* Set some local values */ + +current_subject = (const unsigned char *)subject + start_offset; +end_subject = (const unsigned char *)subject + length; +req_byte_ptr = current_subject - 1; + +#ifdef SUPPORT_UTF8 +utf8 = (re->options & PCRE_UTF8) != 0; +#else +utf8 = FALSE; +#endif + +anchored = (options & (PCRE_ANCHORED|PCRE_DFA_RESTART)) != 0 || + (re->options & PCRE_ANCHORED) != 0; + +/* The remaining fixed data for passing around. */ + +md->start_code = (const uschar *)argument_re + + re->name_table_offset + re->name_count * re->name_entry_size; +md->start_subject = (const unsigned char *)subject; +md->end_subject = end_subject; +md->moptions = options; +md->poptions = re->options; + +/* If the BSR option is not set at match time, copy what was set +at compile time. */ + +if ((md->moptions & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) == 0) + { + if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0) + md->moptions |= re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE); +#ifdef BSR_ANYCRLF + else md->moptions |= PCRE_BSR_ANYCRLF; +#endif + } + +/* Handle different types of newline. The three bits give eight cases. If +nothing is set at run time, whatever was used at compile time applies. */ + +switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : (pcre_uint32)options) & + PCRE_NEWLINE_BITS) + { + case 0: newline = NEWLINE; break; /* Compile-time default */ + case PCRE_NEWLINE_CR: newline = '\r'; break; + case PCRE_NEWLINE_LF: newline = '\n'; break; + case PCRE_NEWLINE_CR+ + PCRE_NEWLINE_LF: newline = ('\r' << 8) | '\n'; break; + case PCRE_NEWLINE_ANY: newline = -1; break; + case PCRE_NEWLINE_ANYCRLF: newline = -2; break; + default: return PCRE_ERROR_BADNEWLINE; + } + +if (newline == -2) + { + md->nltype = NLTYPE_ANYCRLF; + } +else if (newline < 0) + { + md->nltype = NLTYPE_ANY; + } +else + { + md->nltype = NLTYPE_FIXED; + if (newline > 255) + { + md->nllen = 2; + md->nl[0] = (newline >> 8) & 255; + md->nl[1] = newline & 255; + } + else + { + md->nllen = 1; + md->nl[0] = newline; + } + } + +/* Check a UTF-8 string if required. Unfortunately there's no way of passing +back the character offset. */ + +#ifdef SUPPORT_UTF8 +if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0) + { + if (_pcre_valid_utf8((uschar *)subject, length) >= 0) + return PCRE_ERROR_BADUTF8; + if (start_offset > 0 && start_offset < length) + { + int tb = ((uschar *)subject)[start_offset]; + if (tb > 127) + { + tb &= 0xc0; + if (tb != 0 && tb != 0xc0) return PCRE_ERROR_BADUTF8_OFFSET; + } + } + } +#endif + +/* If the exec call supplied NULL for tables, use the inbuilt ones. This +is a feature that makes it possible to save compiled regex and re-use them +in other programs later. */ + +if (md->tables == NULL) md->tables = _pcre_default_tables; + +/* The lower casing table and the "must be at the start of a line" flag are +used in a loop when finding where to start. */ + +lcc = md->tables + lcc_offset; +startline = (re->flags & PCRE_STARTLINE) != 0; +firstline = (re->options & PCRE_FIRSTLINE) != 0; + +/* Set up the first character to match, if available. The first_byte value is +never set for an anchored regular expression, but the anchoring may be forced +at run time, so we have to test for anchoring. The first char may be unset for +an unanchored pattern, of course. If there's no first char and the pattern was +studied, there may be a bitmap of possible first characters. */ + +if (!anchored) + { + if ((re->flags & PCRE_FIRSTSET) != 0) + { + first_byte = re->first_byte & 255; + if ((first_byte_caseless = ((re->first_byte & REQ_CASELESS) != 0)) == TRUE) + first_byte = lcc[first_byte]; + } + else + { + if (startline && study != NULL && + (study->options & PCRE_STUDY_MAPPED) != 0) + start_bits = study->start_bits; + } + } + +/* For anchored or unanchored matches, there may be a "last known required +character" set. */ + +if ((re->flags & PCRE_REQCHSET) != 0) + { + req_byte = re->req_byte & 255; + req_byte_caseless = (re->req_byte & REQ_CASELESS) != 0; + req_byte2 = (md->tables + fcc_offset)[req_byte]; /* case flipped */ + } + +/* Call the main matching function, looping for a non-anchored regex after a +failed match. Unless restarting, optimize by moving to the first match +character if possible, when not anchored. Then unless wanting a partial match, +check for a required later character. */ + +for (;;) + { + int rc; + + if ((options & PCRE_DFA_RESTART) == 0) + { + const uschar *save_end_subject = end_subject; + + /* Advance to a unique first char if possible. If firstline is TRUE, the + start of the match is constrained to the first line of a multiline string. + Implement this by temporarily adjusting end_subject so that we stop + scanning at a newline. If the match fails at the newline, later code breaks + this loop. */ + + if (firstline) + { + const uschar *t = current_subject; + while (t < md->end_subject && !IS_NEWLINE(t)) t++; + end_subject = t; + } + + if (first_byte >= 0) + { + if (first_byte_caseless) + while (current_subject < end_subject && + lcc[*current_subject] != first_byte) + current_subject++; + else + while (current_subject < end_subject && *current_subject != first_byte) + current_subject++; + } + + /* Or to just after a linebreak for a multiline match if possible */ + + else if (startline) + { + if (current_subject > md->start_subject + start_offset) + { + while (current_subject <= end_subject && !WAS_NEWLINE(current_subject)) + current_subject++; + + /* If we have just passed a CR and the newline option is ANY or + ANYCRLF, and we are now at a LF, advance the match position by one more + character. */ + + if (current_subject[-1] == '\r' && + (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) && + current_subject < end_subject && + *current_subject == '\n') + current_subject++; + } + } + + /* Or to a non-unique first char after study */ + + else if (start_bits != NULL) + { + while (current_subject < end_subject) + { + register unsigned int c = *current_subject; + if ((start_bits[c/8] & (1 << (c&7))) == 0) current_subject++; + else break; + } + } + + /* Restore fudged end_subject */ + + end_subject = save_end_subject; + } + + /* If req_byte is set, we know that that character must appear in the subject + for the match to succeed. If the first character is set, req_byte must be + later in the subject; otherwise the test starts at the match point. This + optimization can save a huge amount of work in patterns with nested unlimited + repeats that aren't going to match. Writing separate code for cased/caseless + versions makes it go faster, as does using an autoincrement and backing off + on a match. + + HOWEVER: when the subject string is very, very long, searching to its end can + take a long time, and give bad performance on quite ordinary patterns. This + showed up when somebody was matching /^C/ on a 32-megabyte string... so we + don't do this when the string is sufficiently long. + + ALSO: this processing is disabled when partial matching is requested. + */ + + if (req_byte >= 0 && + end_subject - current_subject < REQ_BYTE_MAX && + (options & PCRE_PARTIAL) == 0) + { + register const uschar *p = current_subject + ((first_byte >= 0)? 1 : 0); + + /* We don't need to repeat the search if we haven't yet reached the + place we found it at last time. */ + + if (p > req_byte_ptr) + { + if (req_byte_caseless) + { + while (p < end_subject) + { + register int pp = *p++; + if (pp == req_byte || pp == req_byte2) { p--; break; } + } + } + else + { + while (p < end_subject) + { + if (*p++ == req_byte) { p--; break; } + } + } + + /* If we can't find the required character, break the matching loop, + which will cause a return or PCRE_ERROR_NOMATCH. */ + + if (p >= end_subject) break; + + /* If we have found the required character, save the point where we + found it, so that we don't search again next time round the loop if + the start hasn't passed this character yet. */ + + req_byte_ptr = p; + } + } + + /* OK, now we can do the business */ + + rc = internal_dfa_exec( + md, /* fixed match data */ + md->start_code, /* this subexpression's code */ + current_subject, /* where we currently are */ + start_offset, /* start offset in subject */ + offsets, /* offset vector */ + offsetcount, /* size of same */ + workspace, /* workspace vector */ + wscount, /* size of same */ + re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL), /* ims flags */ + 0, /* function recurse level */ + 0); /* regex recurse level */ + + /* Anything other than "no match" means we are done, always; otherwise, carry + on only if not anchored. */ + + if (rc != PCRE_ERROR_NOMATCH || anchored) return rc; + + /* Advance to the next subject character unless we are at the end of a line + and firstline is set. */ + + if (firstline && IS_NEWLINE(current_subject)) break; + current_subject++; + if (utf8) + { + while (current_subject < end_subject && (*current_subject & 0xc0) == 0x80) + current_subject++; + } + if (current_subject > end_subject) break; + + /* If we have just passed a CR and we are now at a LF, and the pattern does + not contain any explicit matches for \r or \n, and the newline option is CRLF + or ANY or ANYCRLF, advance the match position by one more character. */ + + if (current_subject[-1] == '\r' && + current_subject < end_subject && + *current_subject == '\n' && + (re->flags & PCRE_HASCRORLF) == 0 && + (md->nltype == NLTYPE_ANY || + md->nltype == NLTYPE_ANYCRLF || + md->nllen == 2)) + current_subject++; + + } /* "Bumpalong" loop */ + +return PCRE_ERROR_NOMATCH; +} + +/* End of pcre_dfa_exec.c */ |