diff options
Diffstat (limited to 'crawl-ref/source/util/pcre/pcregrep.c')
| -rw-r--r-- | crawl-ref/source/util/pcre/pcregrep.c | 2379 |
1 files changed, 2379 insertions, 0 deletions
diff --git a/crawl-ref/source/util/pcre/pcregrep.c b/crawl-ref/source/util/pcre/pcregrep.c new file mode 100644 index 0000000000..87cbd4b415 --- /dev/null +++ b/crawl-ref/source/util/pcre/pcregrep.c @@ -0,0 +1,2379 @@ +/************************************************* +* pcregrep program * +*************************************************/ + +/* This is a grep program that uses the PCRE regular expression library to do +its pattern matching. On a Unix or Win32 system it can recurse into +directories. + + Copyright (c) 1997-2008 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <ctype.h> +#include <locale.h> +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <errno.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +#ifdef SUPPORT_LIBZ +#include <zlib.h> +#endif + +#ifdef SUPPORT_LIBBZ2 +#include <bzlib.h> +#endif + +#include "pcre.h" + +#define FALSE 0 +#define TRUE 1 + +typedef int BOOL; + +#define MAX_PATTERN_COUNT 100 + +#if BUFSIZ > 8192 +#define MBUFTHIRD BUFSIZ +#else +#define MBUFTHIRD 8192 +#endif + +/* Values for the "filenames" variable, which specifies options for file name +output. The order is important; it is assumed that a file name is wanted for +all values greater than FN_DEFAULT. */ + +enum { FN_NONE, FN_DEFAULT, FN_ONLY, FN_NOMATCH_ONLY, FN_FORCE }; + +/* File reading styles */ + +enum { FR_PLAIN, FR_LIBZ, FR_LIBBZ2 }; + +/* Actions for the -d and -D options */ + +enum { dee_READ, dee_SKIP, dee_RECURSE }; +enum { DEE_READ, DEE_SKIP }; + +/* Actions for special processing options (flag bits) */ + +#define PO_WORD_MATCH 0x0001 +#define PO_LINE_MATCH 0x0002 +#define PO_FIXED_STRINGS 0x0004 + +/* Line ending types */ + +enum { EL_LF, EL_CR, EL_CRLF, EL_ANY, EL_ANYCRLF }; + + + +/************************************************* +* Global variables * +*************************************************/ + +/* Jeffrey Friedl has some debugging requirements that are not part of the +regular code. */ + +#ifdef JFRIEDL_DEBUG +static int S_arg = -1; +static unsigned int jfriedl_XR = 0; /* repeat regex attempt this many times */ +static unsigned int jfriedl_XT = 0; /* replicate text this many times */ +static const char *jfriedl_prefix = ""; +static const char *jfriedl_postfix = ""; +#endif + +static int endlinetype; + +static char *colour_string = (char *)"1;31"; +static char *colour_option = NULL; +static char *dee_option = NULL; +static char *DEE_option = NULL; +static char *newline = NULL; +static char *pattern_filename = NULL; +static char *stdin_name = (char *)"(standard input)"; +static char *locale = NULL; + +static const unsigned char *pcretables = NULL; + +static int pattern_count = 0; +static pcre **pattern_list = NULL; +static pcre_extra **hints_list = NULL; + +static char *include_pattern = NULL; +static char *exclude_pattern = NULL; +static char *include_dir_pattern = NULL; +static char *exclude_dir_pattern = NULL; + +static pcre *include_compiled = NULL; +static pcre *exclude_compiled = NULL; +static pcre *include_dir_compiled = NULL; +static pcre *exclude_dir_compiled = NULL; + +static int after_context = 0; +static int before_context = 0; +static int both_context = 0; +static int dee_action = dee_READ; +static int DEE_action = DEE_READ; +static int error_count = 0; +static int filenames = FN_DEFAULT; +static int process_options = 0; + +static BOOL count_only = FALSE; +static BOOL do_colour = FALSE; +static BOOL file_offsets = FALSE; +static BOOL hyphenpending = FALSE; +static BOOL invert = FALSE; +static BOOL line_offsets = FALSE; +static BOOL multiline = FALSE; +static BOOL number = FALSE; +static BOOL only_matching = FALSE; +static BOOL quiet = FALSE; +static BOOL silent = FALSE; +static BOOL utf8 = FALSE; + +/* Structure for options and list of them */ + +enum { OP_NODATA, OP_STRING, OP_OP_STRING, OP_NUMBER, OP_OP_NUMBER, + OP_PATLIST }; + +typedef struct option_item { + int type; + int one_char; + void *dataptr; + const char *long_name; + const char *help_text; +} option_item; + +/* Options without a single-letter equivalent get a negative value. This can be +used to identify them. */ + +#define N_COLOUR (-1) +#define N_EXCLUDE (-2) +#define N_EXCLUDE_DIR (-3) +#define N_HELP (-4) +#define N_INCLUDE (-5) +#define N_INCLUDE_DIR (-6) +#define N_LABEL (-7) +#define N_LOCALE (-8) +#define N_NULL (-9) +#define N_LOFFSETS (-10) +#define N_FOFFSETS (-11) + +static option_item optionlist[] = { + { OP_NODATA, N_NULL, NULL, "", " terminate options" }, + { OP_NODATA, N_HELP, NULL, "help", "display this help and exit" }, + { OP_NUMBER, 'A', &after_context, "after-context=number", "set number of following context lines" }, + { OP_NUMBER, 'B', &before_context, "before-context=number", "set number of prior context lines" }, + { OP_OP_STRING, N_COLOUR, &colour_option, "color=option", "matched text color option" }, + { OP_NUMBER, 'C', &both_context, "context=number", "set number of context lines, before & after" }, + { OP_NODATA, 'c', NULL, "count", "print only a count of matching lines per FILE" }, + { OP_OP_STRING, N_COLOUR, &colour_option, "colour=option", "matched text colour option" }, + { OP_STRING, 'D', &DEE_option, "devices=action","how to handle devices, FIFOs, and sockets" }, + { OP_STRING, 'd', &dee_option, "directories=action", "how to handle directories" }, + { OP_PATLIST, 'e', NULL, "regex(p)", "specify pattern (may be used more than once)" }, + { OP_NODATA, 'F', NULL, "fixed_strings", "patterns are sets of newline-separated strings" }, + { OP_STRING, 'f', &pattern_filename, "file=path", "read patterns from file" }, + { OP_NODATA, N_FOFFSETS, NULL, "file-offsets", "output file offsets, not text" }, + { OP_NODATA, 'H', NULL, "with-filename", "force the prefixing filename on output" }, + { OP_NODATA, 'h', NULL, "no-filename", "suppress the prefixing filename on output" }, + { OP_NODATA, 'i', NULL, "ignore-case", "ignore case distinctions" }, + { OP_NODATA, 'l', NULL, "files-with-matches", "print only FILE names containing matches" }, + { OP_NODATA, 'L', NULL, "files-without-match","print only FILE names not containing matches" }, + { OP_STRING, N_LABEL, &stdin_name, "label=name", "set name for standard input" }, + { OP_NODATA, N_LOFFSETS, NULL, "line-offsets", "output line numbers and offsets, not text" }, + { OP_STRING, N_LOCALE, &locale, "locale=locale", "use the named locale" }, + { OP_NODATA, 'M', NULL, "multiline", "run in multiline mode" }, + { OP_STRING, 'N', &newline, "newline=type", "set newline type (CR, LF, CRLF, ANYCRLF or ANY)" }, + { OP_NODATA, 'n', NULL, "line-number", "print line number with output lines" }, + { OP_NODATA, 'o', NULL, "only-matching", "show only the part of the line that matched" }, + { OP_NODATA, 'q', NULL, "quiet", "suppress output, just set return code" }, + { OP_NODATA, 'r', NULL, "recursive", "recursively scan sub-directories" }, + { OP_STRING, N_EXCLUDE,&exclude_pattern, "exclude=pattern","exclude matching files when recursing" }, + { OP_STRING, N_INCLUDE,&include_pattern, "include=pattern","include matching files when recursing" }, + { OP_STRING, N_EXCLUDE_DIR,&exclude_dir_pattern, "exclude_dir=pattern","exclude matching directories when recursing" }, + { OP_STRING, N_INCLUDE_DIR,&include_dir_pattern, "include_dir=pattern","include matching directories when recursing" }, +#ifdef JFRIEDL_DEBUG + { OP_OP_NUMBER, 'S', &S_arg, "jeffS", "replace matched (sub)string with X" }, +#endif + { OP_NODATA, 's', NULL, "no-messages", "suppress error messages" }, + { OP_NODATA, 'u', NULL, "utf-8", "use UTF-8 mode" }, + { OP_NODATA, 'V', NULL, "version", "print version information and exit" }, + { OP_NODATA, 'v', NULL, "invert-match", "select non-matching lines" }, + { OP_NODATA, 'w', NULL, "word-regex(p)", "force patterns to match only as words" }, + { OP_NODATA, 'x', NULL, "line-regex(p)", "force patterns to match only whole lines" }, + { OP_NODATA, 0, NULL, NULL, NULL } +}; + +/* Tables for prefixing and suffixing patterns, according to the -w, -x, and -F +options. These set the 1, 2, and 4 bits in process_options, respectively. Note +that the combination of -w and -x has the same effect as -x on its own, so we +can treat them as the same. */ + +static const char *prefix[] = { + "", "\\b", "^(?:", "^(?:", "\\Q", "\\b\\Q", "^(?:\\Q", "^(?:\\Q" }; + +static const char *suffix[] = { + "", "\\b", ")$", ")$", "\\E", "\\E\\b", "\\E)$", "\\E)$" }; + +/* UTF-8 tables - used only when the newline setting is "any". */ + +const int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01}; + +const char utf8_table4[] = { + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 }; + + + +/************************************************* +* OS-specific functions * +*************************************************/ + +/* These functions are defined so that they can be made system specific, +although at present the only ones are for Unix, Win32, and for "no support". */ + + +/************* Directory scanning in Unix ***********/ + +#if defined HAVE_SYS_STAT_H && defined HAVE_DIRENT_H && defined HAVE_SYS_TYPES_H +#include <sys/types.h> +#include <sys/stat.h> +#include <dirent.h> + +typedef DIR directory_type; + +static int +isdirectory(char *filename) +{ +struct stat statbuf; +if (stat(filename, &statbuf) < 0) + return 0; /* In the expectation that opening as a file will fail */ +return ((statbuf.st_mode & S_IFMT) == S_IFDIR)? '/' : 0; +} + +static directory_type * +opendirectory(char *filename) +{ +return opendir(filename); +} + +static char * +readdirectory(directory_type *dir) +{ +for (;;) + { + struct dirent *dent = readdir(dir); + if (dent == NULL) return NULL; + if (strcmp(dent->d_name, ".") != 0 && strcmp(dent->d_name, "..") != 0) + return dent->d_name; + } +/* Control never reaches here */ +} + +static void +closedirectory(directory_type *dir) +{ +closedir(dir); +} + + +/************* Test for regular file in Unix **********/ + +static int +isregfile(char *filename) +{ +struct stat statbuf; +if (stat(filename, &statbuf) < 0) + return 1; /* In the expectation that opening as a file will fail */ +return (statbuf.st_mode & S_IFMT) == S_IFREG; +} + + +/************* Test stdout for being a terminal in Unix **********/ + +static BOOL +is_stdout_tty(void) +{ +return isatty(fileno(stdout)); +} + + +/************* Directory scanning in Win32 ***********/ + +/* I (Philip Hazel) have no means of testing this code. It was contributed by +Lionel Fourquaux. David Burgess added a patch to define INVALID_FILE_ATTRIBUTES +when it did not exist. David Byron added a patch that moved the #include of +<windows.h> to before the INVALID_FILE_ATTRIBUTES definition rather than after. +*/ + +#elif HAVE_WINDOWS_H + +#ifndef STRICT +# define STRICT +#endif +#ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN +#endif + +#include <windows.h> + +#ifndef INVALID_FILE_ATTRIBUTES +#define INVALID_FILE_ATTRIBUTES 0xFFFFFFFF +#endif + +typedef struct directory_type +{ +HANDLE handle; +BOOL first; +WIN32_FIND_DATA data; +} directory_type; + +int +isdirectory(char *filename) +{ +DWORD attr = GetFileAttributes(filename); +if (attr == INVALID_FILE_ATTRIBUTES) + return 0; +return ((attr & FILE_ATTRIBUTE_DIRECTORY) != 0) ? '/' : 0; +} + +directory_type * +opendirectory(char *filename) +{ +size_t len; +char *pattern; +directory_type *dir; +DWORD err; +len = strlen(filename); +pattern = (char *) malloc(len + 3); +dir = (directory_type *) malloc(sizeof(*dir)); +if ((pattern == NULL) || (dir == NULL)) + { + fprintf(stderr, "pcregrep: malloc failed\n"); + exit(2); + } +memcpy(pattern, filename, len); +memcpy(&(pattern[len]), "\\*", 3); +dir->handle = FindFirstFile(pattern, &(dir->data)); +if (dir->handle != INVALID_HANDLE_VALUE) + { + free(pattern); + dir->first = TRUE; + return dir; + } +err = GetLastError(); +free(pattern); +free(dir); +errno = (err == ERROR_ACCESS_DENIED) ? EACCES : ENOENT; +return NULL; +} + +char * +readdirectory(directory_type *dir) +{ +for (;;) + { + if (!dir->first) + { + if (!FindNextFile(dir->handle, &(dir->data))) + return NULL; + } + else + { + dir->first = FALSE; + } + if (strcmp(dir->data.cFileName, ".") != 0 && strcmp(dir->data.cFileName, "..") != 0) + return dir->data.cFileName; + } +#ifndef _MSC_VER +return NULL; /* Keep compiler happy; never executed */ +#endif +} + +void +closedirectory(directory_type *dir) +{ +FindClose(dir->handle); +free(dir); +} + + +/************* Test for regular file in Win32 **********/ + +/* I don't know how to do this, or if it can be done; assume all paths are +regular if they are not directories. */ + +int isregfile(char *filename) +{ +return !isdirectory(filename); +} + + +/************* Test stdout for being a terminal in Win32 **********/ + +/* I don't know how to do this; assume never */ + +static BOOL +is_stdout_tty(void) +{ +return FALSE; +} + + +/************* Directory scanning when we can't do it ***********/ + +/* The type is void, and apart from isdirectory(), the functions do nothing. */ + +#else + +typedef void directory_type; + +int isdirectory(char *filename) { return 0; } +directory_type * opendirectory(char *filename) { return (directory_type*)0;} +char *readdirectory(directory_type *dir) { return (char*)0;} +void closedirectory(directory_type *dir) {} + + +/************* Test for regular when we can't do it **********/ + +/* Assume all files are regular. */ + +int isregfile(char *filename) { return 1; } + + +/************* Test stdout for being a terminal when we can't do it **********/ + +static BOOL +is_stdout_tty(void) +{ +return FALSE; +} + + +#endif + + + +#ifndef HAVE_STRERROR +/************************************************* +* Provide strerror() for non-ANSI libraries * +*************************************************/ + +/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror() +in their libraries, but can provide the same facility by this simple +alternative function. */ + +extern int sys_nerr; +extern char *sys_errlist[]; + +char * +strerror(int n) +{ +if (n < 0 || n >= sys_nerr) return "unknown error number"; +return sys_errlist[n]; +} +#endif /* HAVE_STRERROR */ + + + +/************************************************* +* Find end of line * +*************************************************/ + +/* The length of the endline sequence that is found is set via lenptr. This may +be zero at the very end of the file if there is no line-ending sequence there. + +Arguments: + p current position in line + endptr end of available data + lenptr where to put the length of the eol sequence + +Returns: pointer to the last byte of the line +*/ + +static char * +end_of_line(char *p, char *endptr, int *lenptr) +{ +switch(endlinetype) + { + default: /* Just in case */ + case EL_LF: + while (p < endptr && *p != '\n') p++; + if (p < endptr) + { + *lenptr = 1; + return p + 1; + } + *lenptr = 0; + return endptr; + + case EL_CR: + while (p < endptr && *p != '\r') p++; + if (p < endptr) + { + *lenptr = 1; + return p + 1; + } + *lenptr = 0; + return endptr; + + case EL_CRLF: + for (;;) + { + while (p < endptr && *p != '\r') p++; + if (++p >= endptr) + { + *lenptr = 0; + return endptr; + } + if (*p == '\n') + { + *lenptr = 2; + return p + 1; + } + } + break; + + case EL_ANYCRLF: + while (p < endptr) + { + int extra = 0; + register int c = *((unsigned char *)p); + + if (utf8 && c >= 0xc0) + { + int gcii, gcss; + extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */ + gcss = 6*extra; + c = (c & utf8_table3[extra]) << gcss; + for (gcii = 1; gcii <= extra; gcii++) + { + gcss -= 6; + c |= (p[gcii] & 0x3f) << gcss; + } + } + + p += 1 + extra; + + switch (c) + { + case 0x0a: /* LF */ + *lenptr = 1; + return p; + + case 0x0d: /* CR */ + if (p < endptr && *p == 0x0a) + { + *lenptr = 2; + p++; + } + else *lenptr = 1; + return p; + + default: + break; + } + } /* End of loop for ANYCRLF case */ + + *lenptr = 0; /* Must have hit the end */ + return endptr; + + case EL_ANY: + while (p < endptr) + { + int extra = 0; + register int c = *((unsigned char *)p); + + if (utf8 && c >= 0xc0) + { + int gcii, gcss; + extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */ + gcss = 6*extra; + c = (c & utf8_table3[extra]) << gcss; + for (gcii = 1; gcii <= extra; gcii++) + { + gcss -= 6; + c |= (p[gcii] & 0x3f) << gcss; + } + } + + p += 1 + extra; + + switch (c) + { + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + *lenptr = 1; + return p; + + case 0x0d: /* CR */ + if (p < endptr && *p == 0x0a) + { + *lenptr = 2; + p++; + } + else *lenptr = 1; + return p; + + case 0x85: /* NEL */ + *lenptr = utf8? 2 : 1; + return p; + + case 0x2028: /* LS */ + case 0x2029: /* PS */ + *lenptr = 3; + return p; + + default: + break; + } + } /* End of loop for ANY case */ + + *lenptr = 0; /* Must have hit the end */ + return endptr; + } /* End of overall switch */ +} + + + +/************************************************* +* Find start of previous line * +*************************************************/ + +/* This is called when looking back for before lines to print. + +Arguments: + p start of the subsequent line + startptr start of available data + +Returns: pointer to the start of the previous line +*/ + +static char * +previous_line(char *p, char *startptr) +{ +switch(endlinetype) + { + default: /* Just in case */ + case EL_LF: + p--; + while (p > startptr && p[-1] != '\n') p--; + return p; + + case EL_CR: + p--; + while (p > startptr && p[-1] != '\n') p--; + return p; + + case EL_CRLF: + for (;;) + { + p -= 2; + while (p > startptr && p[-1] != '\n') p--; + if (p <= startptr + 1 || p[-2] == '\r') return p; + } + return p; /* But control should never get here */ + + case EL_ANY: + case EL_ANYCRLF: + if (*(--p) == '\n' && p > startptr && p[-1] == '\r') p--; + if (utf8) while ((*p & 0xc0) == 0x80) p--; + + while (p > startptr) + { + register int c; + char *pp = p - 1; + + if (utf8) + { + int extra = 0; + while ((*pp & 0xc0) == 0x80) pp--; + c = *((unsigned char *)pp); + if (c >= 0xc0) + { + int gcii, gcss; + extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */ + gcss = 6*extra; + c = (c & utf8_table3[extra]) << gcss; + for (gcii = 1; gcii <= extra; gcii++) + { + gcss -= 6; + c |= (pp[gcii] & 0x3f) << gcss; + } + } + } + else c = *((unsigned char *)pp); + + if (endlinetype == EL_ANYCRLF) switch (c) + { + case 0x0a: /* LF */ + case 0x0d: /* CR */ + return p; + + default: + break; + } + + else switch (c) + { + case 0x0a: /* LF */ + case 0x0b: /* VT */ + case 0x0c: /* FF */ + case 0x0d: /* CR */ + case 0x85: /* NEL */ + case 0x2028: /* LS */ + case 0x2029: /* PS */ + return p; + + default: + break; + } + + p = pp; /* Back one character */ + } /* End of loop for ANY case */ + + return startptr; /* Hit start of data */ + } /* End of overall switch */ +} + + + + + +/************************************************* +* Print the previous "after" lines * +*************************************************/ + +/* This is called if we are about to lose said lines because of buffer filling, +and at the end of the file. The data in the line is written using fwrite() so +that a binary zero does not terminate it. + +Arguments: + lastmatchnumber the number of the last matching line, plus one + lastmatchrestart where we restarted after the last match + endptr end of available data + printname filename for printing + +Returns: nothing +*/ + +static void do_after_lines(int lastmatchnumber, char *lastmatchrestart, + char *endptr, char *printname) +{ +if (after_context > 0 && lastmatchnumber > 0) + { + int count = 0; + while (lastmatchrestart < endptr && count++ < after_context) + { + int ellength; + char *pp = lastmatchrestart; + if (printname != NULL) fprintf(stdout, "%s-", printname); + if (number) fprintf(stdout, "%d-", lastmatchnumber++); + pp = end_of_line(pp, endptr, &ellength); + fwrite(lastmatchrestart, 1, pp - lastmatchrestart, stdout); + lastmatchrestart = pp; + } + hyphenpending = TRUE; + } +} + + + +/************************************************* +* Grep an individual file * +*************************************************/ + +/* This is called from grep_or_recurse() below. It uses a buffer that is three +times the value of MBUFTHIRD. The matching point is never allowed to stray into +the top third of the buffer, thus keeping more of the file available for +context printing or for multiline scanning. For large files, the pointer will +be in the middle third most of the time, so the bottom third is available for +"before" context printing. + +Arguments: + handle the fopened FILE stream for a normal file + the gzFile pointer when reading is via libz + the BZFILE pointer when reading is via libbz2 + frtype FR_PLAIN, FR_LIBZ, or FR_LIBBZ2 + printname the file name if it is to be printed for each match + or NULL if the file name is not to be printed + it cannot be NULL if filenames[_nomatch]_only is set + +Returns: 0 if there was at least one match + 1 otherwise (no matches) + 2 if there is a read error on a .bz2 file +*/ + +static int +pcregrep(void *handle, int frtype, char *printname) +{ +int rc = 1; +int linenumber = 1; +int lastmatchnumber = 0; +int count = 0; +int filepos = 0; +int offsets[99]; +char *lastmatchrestart = NULL; +char buffer[3*MBUFTHIRD]; +char *ptr = buffer; +char *endptr; +size_t bufflength; +BOOL endhyphenpending = FALSE; +FILE *in = NULL; /* Ensure initialized */ + +#ifdef SUPPORT_LIBZ +gzFile ingz = NULL; +#endif + +#ifdef SUPPORT_LIBBZ2 +BZFILE *inbz2 = NULL; +#endif + + +/* Do the first read into the start of the buffer and set up the pointer to end +of what we have. In the case of libz, a non-zipped .gz file will be read as a +plain file. However, if a .bz2 file isn't actually bzipped, the first read will +fail. */ + +#ifdef SUPPORT_LIBZ +if (frtype == FR_LIBZ) + { + ingz = (gzFile)handle; + bufflength = gzread (ingz, buffer, 3*MBUFTHIRD); + } +else +#endif + +#ifdef SUPPORT_LIBBZ2 +if (frtype == FR_LIBBZ2) + { + inbz2 = (BZFILE *)handle; + bufflength = BZ2_bzread(inbz2, buffer, 3*MBUFTHIRD); + if ((int)bufflength < 0) return 2; /* Gotcha: bufflength is size_t; */ + } /* without the cast it is unsigned. */ +else +#endif + + { + in = (FILE *)handle; + bufflength = fread(buffer, 1, 3*MBUFTHIRD, in); + } + +endptr = buffer + bufflength; + +/* Loop while the current pointer is not at the end of the file. For large +files, endptr will be at the end of the buffer when we are in the middle of the +file, but ptr will never get there, because as soon as it gets over 2/3 of the +way, the buffer is shifted left and re-filled. */ + +while (ptr < endptr) + { + int i, endlinelength; + int mrc = 0; + BOOL match = FALSE; + char *matchptr = ptr; + char *t = ptr; + size_t length, linelength; + + /* At this point, ptr is at the start of a line. We need to find the length + of the subject string to pass to pcre_exec(). In multiline mode, it is the + length remainder of the data in the buffer. Otherwise, it is the length of + the next line. After matching, we always advance by the length of the next + line. In multiline mode the PCRE_FIRSTLINE option is used for compiling, so + that any match is constrained to be in the first line. */ + + t = end_of_line(t, endptr, &endlinelength); + linelength = t - ptr - endlinelength; + length = multiline? (size_t)(endptr - ptr) : linelength; + + /* Extra processing for Jeffrey Friedl's debugging. */ + +#ifdef JFRIEDL_DEBUG + if (jfriedl_XT || jfriedl_XR) + { + #include <sys/time.h> + #include <time.h> + struct timeval start_time, end_time; + struct timezone dummy; + + if (jfriedl_XT) + { + unsigned long newlen = length * jfriedl_XT + strlen(jfriedl_prefix) + strlen(jfriedl_postfix); + const char *orig = ptr; + ptr = malloc(newlen + 1); + if (!ptr) { + printf("out of memory"); + exit(2); + } + endptr = ptr; + strcpy(endptr, jfriedl_prefix); endptr += strlen(jfriedl_prefix); + for (i = 0; i < jfriedl_XT; i++) { + strncpy(endptr, orig, length); + endptr += length; + } + strcpy(endptr, jfriedl_postfix); endptr += strlen(jfriedl_postfix); + length = newlen; + } + + if (gettimeofday(&start_time, &dummy) != 0) + perror("bad gettimeofday"); + + + for (i = 0; i < jfriedl_XR; i++) + match = (pcre_exec(pattern_list[0], hints_list[0], ptr, length, 0, 0, offsets, 99) >= 0); + + if (gettimeofday(&end_time, &dummy) != 0) + perror("bad gettimeofday"); + + double delta = ((end_time.tv_sec + (end_time.tv_usec / 1000000.0)) + - + (start_time.tv_sec + (start_time.tv_usec / 1000000.0))); + + printf("%s TIMER[%.4f]\n", match ? "MATCH" : "FAIL", delta); + return 0; + } +#endif + + /* We come back here after a match when the -o option (only_matching) is set, + in order to find any further matches in the same line. */ + + ONLY_MATCHING_RESTART: + + /* Run through all the patterns until one matches. Note that we don't include + the final newline in the subject string. */ + + for (i = 0; i < pattern_count; i++) + { + mrc = pcre_exec(pattern_list[i], hints_list[i], matchptr, length, 0, 0, + offsets, 99); + if (mrc >= 0) { match = TRUE; break; } + if (mrc != PCRE_ERROR_NOMATCH) + { + fprintf(stderr, "pcregrep: pcre_exec() error %d while matching ", mrc); + if (pattern_count > 1) fprintf(stderr, "pattern number %d to ", i+1); + fprintf(stderr, "this line:\n"); + fwrite(matchptr, 1, linelength, stderr); /* In case binary zero included */ + fprintf(stderr, "\n"); + if (error_count == 0 && + (mrc == PCRE_ERROR_MATCHLIMIT || mrc == PCRE_ERROR_RECURSIONLIMIT)) + { + fprintf(stderr, "pcregrep: error %d means that a resource limit " + "was exceeded\n", mrc); + fprintf(stderr, "pcregrep: check your regex for nested unlimited loops\n"); + } + if (error_count++ > 20) + { + fprintf(stderr, "pcregrep: too many errors - abandoned\n"); + exit(2); + } + match = invert; /* No more matching; don't show the line again */ + break; + } + } + + /* If it's a match or a not-match (as required), do what's wanted. */ + + if (match != invert) + { + BOOL hyphenprinted = FALSE; + + /* We've failed if we want a file that doesn't have any matches. */ + + if (filenames == FN_NOMATCH_ONLY) return 1; + + /* Just count if just counting is wanted. */ + + if (count_only) count++; + + /* If all we want is a file name, there is no need to scan any more lines + in the file. */ + + else if (filenames == FN_ONLY) + { + fprintf(stdout, "%s\n", printname); + return 0; + } + + /* Likewise, if all we want is a yes/no answer. */ + + else if (quiet) return 0; + + /* The --only-matching option prints just the substring that matched, and + the --file-offsets and --line-offsets options output offsets for the + matching substring (they both force --only-matching). None of these options + prints any context. Afterwards, adjust the start and length, and then jump + back to look for further matches in the same line. If we are in invert + mode, however, nothing is printed - this could be still useful because the + return code is set. */ + + else if (only_matching) + { + if (!invert) + { + if (printname != NULL) fprintf(stdout, "%s:", printname); + if (number) fprintf(stdout, "%d:", linenumber); + if (line_offsets) + fprintf(stdout, "%d,%d", matchptr + offsets[0] - ptr, + offsets[1] - offsets[0]); + else if (file_offsets) + fprintf(stdout, "%d,%d", filepos + matchptr + offsets[0] - ptr, + offsets[1] - offsets[0]); + else + fwrite(matchptr + offsets[0], 1, offsets[1] - offsets[0], stdout); + fprintf(stdout, "\n"); + matchptr += offsets[1]; + length -= offsets[1]; + match = FALSE; + goto ONLY_MATCHING_RESTART; + } + } + + /* This is the default case when none of the above options is set. We print + the matching lines(s), possibly preceded and/or followed by other lines of + context. */ + + else + { + /* See if there is a requirement to print some "after" lines from a + previous match. We never print any overlaps. */ + + if (after_context > 0 && lastmatchnumber > 0) + { + int ellength; + int linecount = 0; + char *p = lastmatchrestart; + + while (p < ptr && linecount < after_context) + { + p = end_of_line(p, ptr, &ellength); + linecount++; + } + + /* It is important to advance lastmatchrestart during this printing so + that it interacts correctly with any "before" printing below. Print + each line's data using fwrite() in case there are binary zeroes. */ + + while (lastmatchrestart < p) + { + char *pp = lastmatchrestart; + if (printname != NULL) fprintf(stdout, "%s-", printname); + if (number) fprintf(stdout, "%d-", lastmatchnumber++); + pp = end_of_line(pp, endptr, &ellength); + fwrite(lastmatchrestart, 1, pp - lastmatchrestart, stdout); + lastmatchrestart = pp; + } + if (lastmatchrestart != ptr) hyphenpending = TRUE; + } + + /* If there were non-contiguous lines printed above, insert hyphens. */ + + if (hyphenpending) + { + fprintf(stdout, "--\n"); + hyphenpending = FALSE; + hyphenprinted = TRUE; + } + + /* See if there is a requirement to print some "before" lines for this + match. Again, don't print overlaps. */ + + if (before_context > 0) + { + int linecount = 0; + char *p = ptr; + + while (p > buffer && (lastmatchnumber == 0 || p > lastmatchrestart) && + linecount < before_context) + { + linecount++; + p = previous_line(p, buffer); + } + + if (lastmatchnumber > 0 && p > lastmatchrestart && !hyphenprinted) + fprintf(stdout, "--\n"); + + while (p < ptr) + { + int ellength; + char *pp = p; + if (printname != NULL) fprintf(stdout, "%s-", printname); + if (number) fprintf(stdout, "%d-", linenumber - linecount--); + pp = end_of_line(pp, endptr, &ellength); + fwrite(p, 1, pp - p, stdout); + p = pp; + } + } + + /* Now print the matching line(s); ensure we set hyphenpending at the end + of the file if any context lines are being output. */ + + if (after_context > 0 || before_context > 0) + endhyphenpending = TRUE; + + if (printname != NULL) fprintf(stdout, "%s:", printname); + if (number) fprintf(stdout, "%d:", linenumber); + + /* In multiline mode, we want to print to the end of the line in which + the end of the matched string is found, so we adjust linelength and the + line number appropriately, but only when there actually was a match + (invert not set). Because the PCRE_FIRSTLINE option is set, the start of + the match will always be before the first newline sequence. */ + + if (multiline) + { + int ellength; + char *endmatch = ptr; + if (!invert) + { + endmatch += offsets[1]; + t = ptr; + while (t < endmatch) + { + t = end_of_line(t, endptr, &ellength); + if (t <= endmatch) linenumber++; else break; + } + } + endmatch = end_of_line(endmatch, endptr, &ellength); + linelength = endmatch - ptr - ellength; + } + + /*** NOTE: Use only fwrite() to output the data line, so that binary + zeroes are treated as just another data character. */ + + /* This extra option, for Jeffrey Friedl's debugging requirements, + replaces the matched string, or a specific captured string if it exists, + with X. When this happens, colouring is ignored. */ + +#ifdef JFRIEDL_DEBUG + if (S_arg >= 0 && S_arg < mrc) + { + int first = S_arg * 2; + int last = first + 1; + fwrite(ptr, 1, offsets[first], stdout); + fprintf(stdout, "X"); + fwrite(ptr + offsets[last], 1, linelength - offsets[last], stdout); + } + else +#endif + + /* We have to split the line(s) up if colouring. */ + + if (do_colour) + { + fwrite(ptr, 1, offsets[0], stdout); + fprintf(stdout, "%c[%sm", 0x1b, colour_string); + fwrite(ptr + offsets[0], 1, offsets[1] - offsets[0], stdout); + fprintf(stdout, "%c[00m", 0x1b); + fwrite(ptr + offsets[1], 1, (linelength + endlinelength) - offsets[1], + stdout); + } + else fwrite(ptr, 1, linelength + endlinelength, stdout); + } + + /* End of doing what has to be done for a match */ + + rc = 0; /* Had some success */ + + /* Remember where the last match happened for after_context. We remember + where we are about to restart, and that line's number. */ + + lastmatchrestart = ptr + linelength + endlinelength; + lastmatchnumber = linenumber + 1; + } + + /* For a match in multiline inverted mode (which of course did not cause + anything to be printed), we have to move on to the end of the match before + proceeding. */ + + if (multiline && invert && match) + { + int ellength; + char *endmatch = ptr + offsets[1]; + t = ptr; + while (t < endmatch) + { + t = end_of_line(t, endptr, &ellength); + if (t <= endmatch) linenumber++; else break; + } + endmatch = end_of_line(endmatch, endptr, &ellength); + linelength = endmatch - ptr - ellength; + } + + /* Advance to after the newline and increment the line number. The file + offset to the current line is maintained in filepos. */ + + ptr += linelength + endlinelength; + filepos += linelength + endlinelength; + linenumber++; + + /* If we haven't yet reached the end of the file (the buffer is full), and + the current point is in the top 1/3 of the buffer, slide the buffer down by + 1/3 and refill it. Before we do this, if some unprinted "after" lines are + about to be lost, print them. */ + + if (bufflength >= sizeof(buffer) && ptr > buffer + 2*MBUFTHIRD) + { + if (after_context > 0 && + lastmatchnumber > 0 && + lastmatchrestart < buffer + MBUFTHIRD) + { + do_after_lines(lastmatchnumber, lastmatchrestart, endptr, printname); + lastmatchnumber = 0; + } + + /* Now do the shuffle */ + + memmove(buffer, buffer + MBUFTHIRD, 2*MBUFTHIRD); + ptr -= MBUFTHIRD; + +#ifdef SUPPORT_LIBZ + if (frtype == FR_LIBZ) + bufflength = 2*MBUFTHIRD + + gzread (ingz, buffer + 2*MBUFTHIRD, MBUFTHIRD); + else +#endif + +#ifdef SUPPORT_LIBBZ2 + if (frtype == FR_LIBBZ2) + bufflength = 2*MBUFTHIRD + + BZ2_bzread(inbz2, buffer + 2*MBUFTHIRD, MBUFTHIRD); + else +#endif + + bufflength = 2*MBUFTHIRD + fread(buffer + 2*MBUFTHIRD, 1, MBUFTHIRD, in); + + endptr = buffer + bufflength; + + /* Adjust any last match point */ + + if (lastmatchnumber > 0) lastmatchrestart -= MBUFTHIRD; + } + } /* Loop through the whole file */ + +/* End of file; print final "after" lines if wanted; do_after_lines sets +hyphenpending if it prints something. */ + +if (!only_matching && !count_only) + { + do_after_lines(lastmatchnumber, lastmatchrestart, endptr, printname); + hyphenpending |= endhyphenpending; + } + +/* Print the file name if we are looking for those without matches and there +were none. If we found a match, we won't have got this far. */ + +if (filenames == FN_NOMATCH_ONLY) + { + fprintf(stdout, "%s\n", printname); + return 0; + } + +/* Print the match count if wanted */ + +if (count_only) + { + if (printname != NULL) fprintf(stdout, "%s:", printname); + fprintf(stdout, "%d\n", count); + } + +return rc; +} + + + +/************************************************* +* Grep a file or recurse into a directory * +*************************************************/ + +/* Given a path name, if it's a directory, scan all the files if we are +recursing; if it's a file, grep it. + +Arguments: + pathname the path to investigate + dir_recurse TRUE if recursing is wanted (-r or -drecurse) + only_one_at_top TRUE if the path is the only one at toplevel + +Returns: 0 if there was at least one match + 1 if there were no matches + 2 there was some kind of error + +However, file opening failures are suppressed if "silent" is set. +*/ + +static int +grep_or_recurse(char *pathname, BOOL dir_recurse, BOOL only_one_at_top) +{ +int rc = 1; +int sep; +int frtype; +int pathlen; +void *handle; +FILE *in = NULL; /* Ensure initialized */ + +#ifdef SUPPORT_LIBZ +gzFile ingz = NULL; +#endif + +#ifdef SUPPORT_LIBBZ2 +BZFILE *inbz2 = NULL; +#endif + +/* If the file name is "-" we scan stdin */ + +if (strcmp(pathname, "-") == 0) + { + return pcregrep(stdin, FR_PLAIN, + (filenames > FN_DEFAULT || (filenames == FN_DEFAULT && !only_one_at_top))? + stdin_name : NULL); + } + +/* If the file is a directory, skip if skipping or if we are recursing, scan +each file and directory within it, subject to any include or exclude patterns +that were set. The scanning code is localized so it can be made +system-specific. */ + +if ((sep = isdirectory(pathname)) != 0) + { + if (dee_action == dee_SKIP) return 1; + if (dee_action == dee_RECURSE) + { + char buffer[1024]; + char *nextfile; + directory_type *dir = opendirectory(pathname); + + if (dir == NULL) + { + if (!silent) + fprintf(stderr, "pcregrep: Failed to open directory %s: %s\n", pathname, + strerror(errno)); + return 2; + } + + while ((nextfile = readdirectory(dir)) != NULL) + { + int frc, nflen; + sprintf(buffer, "%.512s%c%.128s", pathname, sep, nextfile); + nflen = strlen(nextfile); + + if (isdirectory(buffer)) + { + if (exclude_dir_compiled != NULL && + pcre_exec(exclude_dir_compiled, NULL, nextfile, nflen, 0, 0, NULL, 0) >= 0) + continue; + + if (include_dir_compiled != NULL && + pcre_exec(include_dir_compiled, NULL, nextfile, nflen, 0, 0, NULL, 0) < 0) + continue; + } + else + { + if (exclude_compiled != NULL && + pcre_exec(exclude_compiled, NULL, nextfile, nflen, 0, 0, NULL, 0) >= 0) + continue; + + if (include_compiled != NULL && + pcre_exec(include_compiled, NULL, nextfile, nflen, 0, 0, NULL, 0) < 0) + continue; + } + + frc = grep_or_recurse(buffer, dir_recurse, FALSE); + if (frc > 1) rc = frc; + else if (frc == 0 && rc == 1) rc = 0; + } + + closedirectory(dir); + return rc; + } + } + +/* If the file is not a directory and not a regular file, skip it if that's +been requested. */ + +else if (!isregfile(pathname) && DEE_action == DEE_SKIP) return 1; + +/* Control reaches here if we have a regular file, or if we have a directory +and recursion or skipping was not requested, or if we have anything else and +skipping was not requested. The scan proceeds. If this is the first and only +argument at top level, we don't show the file name, unless we are only showing +the file name, or the filename was forced (-H). */ + +pathlen = strlen(pathname); + +/* Open using zlib if it is supported and the file name ends with .gz. */ + +#ifdef SUPPORT_LIBZ +if (pathlen > 3 && strcmp(pathname + pathlen - 3, ".gz") == 0) + { + ingz = gzopen(pathname, "rb"); + if (ingz == NULL) + { + if (!silent) + fprintf(stderr, "pcregrep: Failed to open %s: %s\n", pathname, + strerror(errno)); + return 2; + } + handle = (void *)ingz; + frtype = FR_LIBZ; + } +else +#endif + +/* Otherwise open with bz2lib if it is supported and the name ends with .bz2. */ + +#ifdef SUPPORT_LIBBZ2 +if (pathlen > 4 && strcmp(pathname + pathlen - 4, ".bz2") == 0) + { + inbz2 = BZ2_bzopen(pathname, "rb"); + handle = (void *)inbz2; + frtype = FR_LIBBZ2; + } +else +#endif + +/* Otherwise use plain fopen(). The label is so that we can come back here if +an attempt to read a .bz2 file indicates that it really is a plain file. */ + +#ifdef SUPPORT_LIBBZ2 +PLAIN_FILE: +#endif + { + in = fopen(pathname, "r"); + handle = (void *)in; + frtype = FR_PLAIN; + } + +/* All the opening methods return errno when they fail. */ + +if (handle == NULL) + { + if (!silent) + fprintf(stderr, "pcregrep: Failed to open %s: %s\n", pathname, + strerror(errno)); + return 2; + } + +/* Now grep the file */ + +rc = pcregrep(handle, frtype, (filenames > FN_DEFAULT || + (filenames == FN_DEFAULT && !only_one_at_top))? pathname : NULL); + +/* Close in an appropriate manner. */ + +#ifdef SUPPORT_LIBZ +if (frtype == FR_LIBZ) + gzclose(ingz); +else +#endif + +/* If it is a .bz2 file and the result is 2, it means that the first attempt to +read failed. If the error indicates that the file isn't in fact bzipped, try +again as a normal file. */ + +#ifdef SUPPORT_LIBBZ2 +if (frtype == FR_LIBBZ2) + { + if (rc == 2) + { + int errnum; + const char *err = BZ2_bzerror(inbz2, &errnum); + if (errnum == BZ_DATA_ERROR_MAGIC) + { + BZ2_bzclose(inbz2); + goto PLAIN_FILE; + } + else if (!silent) + fprintf(stderr, "pcregrep: Failed to read %s using bzlib: %s\n", + pathname, err); + } + BZ2_bzclose(inbz2); + } +else +#endif + +/* Normal file close */ + +fclose(in); + +/* Pass back the yield from pcregrep(). */ + +return rc; +} + + + + +/************************************************* +* Usage function * +*************************************************/ + +static int +usage(int rc) +{ +option_item *op; +fprintf(stderr, "Usage: pcregrep [-"); +for (op = optionlist; op->one_char != 0; op++) + { + if (op->one_char > 0) fprintf(stderr, "%c", op->one_char); + } +fprintf(stderr, "] [long options] [pattern] [files]\n"); +fprintf(stderr, "Type `pcregrep --help' for more information and the long " + "options.\n"); +return rc; +} + + + + +/************************************************* +* Help function * +*************************************************/ + +static void +help(void) +{ +option_item *op; + +printf("Usage: pcregrep [OPTION]... [PATTERN] [FILE1 FILE2 ...]\n"); +printf("Search for PATTERN in each FILE or standard input.\n"); +printf("PATTERN must be present if neither -e nor -f is used.\n"); +printf("\"-\" can be used as a file name to mean STDIN.\n"); + +#ifdef SUPPORT_LIBZ +printf("Files whose names end in .gz are read using zlib.\n"); +#endif + +#ifdef SUPPORT_LIBBZ2 +printf("Files whose names end in .bz2 are read using bzlib2.\n"); +#endif + +#if defined SUPPORT_LIBZ || defined SUPPORT_LIBBZ2 +printf("Other files and the standard input are read as plain files.\n\n"); +#else +printf("All files are read as plain files, without any interpretation.\n\n"); +#endif + +printf("Example: pcregrep -i 'hello.*world' menu.h main.c\n\n"); +printf("Options:\n"); + +for (op = optionlist; op->one_char != 0; op++) + { + int n; + char s[4]; + if (op->one_char > 0) sprintf(s, "-%c,", op->one_char); else strcpy(s, " "); + n = 30 - printf(" %s --%s", s, op->long_name); + if (n < 1) n = 1; + printf("%.*s%s\n", n, " ", op->help_text); + } + +printf("\nWhen reading patterns from a file instead of using a command line option,\n"); +printf("trailing white space is removed and blank lines are ignored.\n"); +printf("There is a maximum of %d patterns.\n", MAX_PATTERN_COUNT); + +printf("\nWith no FILEs, read standard input. If fewer than two FILEs given, assume -h.\n"); +printf("Exit status is 0 if any matches, 1 if no matches, and 2 if trouble.\n"); +} + + + + +/************************************************* +* Handle a single-letter, no data option * +*************************************************/ + +static int +handle_option(int letter, int options) +{ +switch(letter) + { + case N_FOFFSETS: file_offsets = TRUE; break; + case N_HELP: help(); exit(0); + case N_LOFFSETS: line_offsets = number = TRUE; break; + case 'c': count_only = TRUE; break; + case 'F': process_options |= PO_FIXED_STRINGS; break; + case 'H': filenames = FN_FORCE; break; + case 'h': filenames = FN_NONE; break; + case 'i': options |= PCRE_CASELESS; break; + case 'l': filenames = FN_ONLY; break; + case 'L': filenames = FN_NOMATCH_ONLY; break; + case 'M': multiline = TRUE; options |= PCRE_MULTILINE|PCRE_FIRSTLINE; break; + case 'n': number = TRUE; break; + case 'o': only_matching = TRUE; break; + case 'q': quiet = TRUE; break; + case 'r': dee_action = dee_RECURSE; break; + case 's': silent = TRUE; break; + case 'u': options |= PCRE_UTF8; utf8 = TRUE; break; + case 'v': invert = TRUE; break; + case 'w': process_options |= PO_WORD_MATCH; break; + case 'x': process_options |= PO_LINE_MATCH; break; + + case 'V': + fprintf(stderr, "pcregrep version %s\n", pcre_version()); + exit(0); + break; + + default: + fprintf(stderr, "pcregrep: Unknown option -%c\n", letter); + exit(usage(2)); + } + +return options; +} + + + + +/************************************************* +* Construct printed ordinal * +*************************************************/ + +/* This turns a number into "1st", "3rd", etc. */ + +static char * +ordin(int n) +{ +static char buffer[8]; +char *p = buffer; +sprintf(p, "%d", n); +while (*p != 0) p++; +switch (n%10) + { + case 1: strcpy(p, "st"); break; + case 2: strcpy(p, "nd"); break; + case 3: strcpy(p, "rd"); break; + default: strcpy(p, "th"); break; + } +return buffer; +} + + + +/************************************************* +* Compile a single pattern * +*************************************************/ + +/* When the -F option has been used, this is called for each substring. +Otherwise it's called for each supplied pattern. + +Arguments: + pattern the pattern string + options the PCRE options + filename the file name, or NULL for a command-line pattern + count 0 if this is the only command line pattern, or + number of the command line pattern, or + linenumber for a pattern from a file + +Returns: TRUE on success, FALSE after an error +*/ + +static BOOL +compile_single_pattern(char *pattern, int options, char *filename, int count) +{ +char buffer[MBUFTHIRD + 16]; +const char *error; +int errptr; + +if (pattern_count >= MAX_PATTERN_COUNT) + { + fprintf(stderr, "pcregrep: Too many %spatterns (max %d)\n", + (filename == NULL)? "command-line " : "", MAX_PATTERN_COUNT); + return FALSE; + } + +sprintf(buffer, "%s%.*s%s", prefix[process_options], MBUFTHIRD, pattern, + suffix[process_options]); +pattern_list[pattern_count] = + pcre_compile(buffer, options, &error, &errptr, pcretables); +if (pattern_list[pattern_count] != NULL) + { + pattern_count++; + return TRUE; + } + +/* Handle compile errors */ + +errptr -= (int)strlen(prefix[process_options]); +if (errptr > (int)strlen(pattern)) errptr = (int)strlen(pattern); + +if (filename == NULL) + { + if (count == 0) + fprintf(stderr, "pcregrep: Error in command-line regex " + "at offset %d: %s\n", errptr, error); + else + fprintf(stderr, "pcregrep: Error in %s command-line regex " + "at offset %d: %s\n", ordin(count), errptr, error); + } +else + { + fprintf(stderr, "pcregrep: Error in regex in line %d of %s " + "at offset %d: %s\n", count, filename, errptr, error); + } + +return FALSE; +} + + + +/************************************************* +* Compile one supplied pattern * +*************************************************/ + +/* When the -F option has been used, each string may be a list of strings, +separated by line breaks. They will be matched literally. + +Arguments: + pattern the pattern string + options the PCRE options + filename the file name, or NULL for a command-line pattern + count 0 if this is the only command line pattern, or + number of the command line pattern, or + linenumber for a pattern from a file + +Returns: TRUE on success, FALSE after an error +*/ + +static BOOL +compile_pattern(char *pattern, int options, char *filename, int count) +{ +if ((process_options & PO_FIXED_STRINGS) != 0) + { + char *eop = pattern + strlen(pattern); + char buffer[MBUFTHIRD]; + for(;;) + { + int ellength; + char *p = end_of_line(pattern, eop, &ellength); + if (ellength == 0) + return compile_single_pattern(pattern, options, filename, count); + sprintf(buffer, "%.*s", (int)(p - pattern - ellength), pattern); + pattern = p; + if (!compile_single_pattern(buffer, options, filename, count)) + return FALSE; + } + } +else return compile_single_pattern(pattern, options, filename, count); +} + + + +/************************************************* +* Main program * +*************************************************/ + +/* Returns 0 if something matched, 1 if nothing matched, 2 after an error. */ + +int +main(int argc, char **argv) +{ +int i, j; +int rc = 1; +int pcre_options = 0; +int cmd_pattern_count = 0; +int hint_count = 0; +int errptr; +BOOL only_one_at_top; +char *patterns[MAX_PATTERN_COUNT]; +const char *locale_from = "--locale"; +const char *error; + +/* Set the default line ending value from the default in the PCRE library; +"lf", "cr", "crlf", and "any" are supported. Anything else is treated as "lf". +*/ + +(void)pcre_config(PCRE_CONFIG_NEWLINE, &i); +switch(i) + { + default: newline = (char *)"lf"; break; + case '\r': newline = (char *)"cr"; break; + case ('\r' << 8) | '\n': newline = (char *)"crlf"; break; + case -1: newline = (char *)"any"; break; + case -2: newline = (char *)"anycrlf"; break; + } + +/* Process the options */ + +for (i = 1; i < argc; i++) + { + option_item *op = NULL; + char *option_data = (char *)""; /* default to keep compiler happy */ + BOOL longop; + BOOL longopwasequals = FALSE; + + if (argv[i][0] != '-') break; + + /* If we hit an argument that is just "-", it may be a reference to STDIN, + but only if we have previously had -e or -f to define the patterns. */ + + if (argv[i][1] == 0) + { + if (pattern_filename != NULL || pattern_count > 0) break; + else exit(usage(2)); + } + + /* Handle a long name option, or -- to terminate the options */ + + if (argv[i][1] == '-') + { + char *arg = argv[i] + 2; + char *argequals = strchr(arg, '='); + + if (*arg == 0) /* -- terminates options */ + { + i++; + break; /* out of the options-handling loop */ + } + + longop = TRUE; + + /* Some long options have data that follows after =, for example file=name. + Some options have variations in the long name spelling: specifically, we + allow "regexp" because GNU grep allows it, though I personally go along + with Jeffrey Friedl and Larry Wall in preferring "regex" without the "p". + These options are entered in the table as "regex(p)". No option is in both + these categories, fortunately. */ + + for (op = optionlist; op->one_char != 0; op++) + { + char *opbra = strchr(op->long_name, '('); + char *equals = strchr(op->long_name, '='); + if (opbra == NULL) /* Not a (p) case */ + { + if (equals == NULL) /* Not thing=data case */ + { + if (strcmp(arg, op->long_name) == 0) break; + } + else /* Special case xxx=data */ + { + int oplen = equals - op->long_name; + int arglen = (argequals == NULL)? (int)strlen(arg) : argequals - arg; + if (oplen == arglen && strncmp(arg, op->long_name, oplen) == 0) + { + option_data = arg + arglen; + if (*option_data == '=') + { + option_data++; + longopwasequals = TRUE; + } + break; + } + } + } + else /* Special case xxxx(p) */ + { + char buff1[24]; + char buff2[24]; + int baselen = opbra - op->long_name; + sprintf(buff1, "%.*s", baselen, op->long_name); + sprintf(buff2, "%s%.*s", buff1, + (int)strlen(op->long_name) - baselen - 2, opbra + 1); + if (strcmp(arg, buff1) == 0 || strcmp(arg, buff2) == 0) + break; + } + } + + if (op->one_char == 0) + { + fprintf(stderr, "pcregrep: Unknown option %s\n", argv[i]); + exit(usage(2)); + } + } + + + /* Jeffrey Friedl's debugging harness uses these additional options which + are not in the right form for putting in the option table because they use + only one hyphen, yet are more than one character long. By putting them + separately here, they will not get displayed as part of the help() output, + but I don't think Jeffrey will care about that. */ + +#ifdef JFRIEDL_DEBUG + else if (strcmp(argv[i], "-pre") == 0) { + jfriedl_prefix = argv[++i]; + continue; + } else if (strcmp(argv[i], "-post") == 0) { + jfriedl_postfix = argv[++i]; + continue; + } else if (strcmp(argv[i], "-XT") == 0) { + sscanf(argv[++i], "%d", &jfriedl_XT); + continue; + } else if (strcmp(argv[i], "-XR") == 0) { + sscanf(argv[++i], "%d", &jfriedl_XR); + continue; + } +#endif + + + /* One-char options; many that have no data may be in a single argument; we + continue till we hit the last one or one that needs data. */ + + else + { + char *s = argv[i] + 1; + longop = FALSE; + while (*s != 0) + { + for (op = optionlist; op->one_char != 0; op++) + { if (*s == op->one_char) break; } + if (op->one_char == 0) + { + fprintf(stderr, "pcregrep: Unknown option letter '%c' in \"%s\"\n", + *s, argv[i]); + exit(usage(2)); + } + if (op->type != OP_NODATA || s[1] == 0) + { + option_data = s+1; + break; + } + pcre_options = handle_option(*s++, pcre_options); + } + } + + /* At this point we should have op pointing to a matched option. If the type + is NO_DATA, it means that there is no data, and the option might set + something in the PCRE options. */ + + if (op->type == OP_NODATA) + { + pcre_options = handle_option(op->one_char, pcre_options); + continue; + } + + /* If the option type is OP_OP_STRING or OP_OP_NUMBER, it's an option that + either has a value or defaults to something. It cannot have data in a + separate item. At the moment, the only such options are "colo(u)r" and + Jeffrey Friedl's special -S debugging option. */ + + if (*option_data == 0 && + (op->type == OP_OP_STRING || op->type == OP_OP_NUMBER)) + { + switch (op->one_char) + { + case N_COLOUR: + colour_option = (char *)"auto"; + break; +#ifdef JFRIEDL_DEBUG + case 'S': + S_arg = 0; + break; +#endif + } + continue; + } + + /* Otherwise, find the data string for the option. */ + + if (*option_data == 0) + { + if (i >= argc - 1 || longopwasequals) + { + fprintf(stderr, "pcregrep: Data missing after %s\n", argv[i]); + exit(usage(2)); + } + option_data = argv[++i]; + } + + /* If the option type is OP_PATLIST, it's the -e option, which can be called + multiple times to create a list of patterns. */ + + if (op->type == OP_PATLIST) + { + if (cmd_pattern_count >= MAX_PATTERN_COUNT) + { + fprintf(stderr, "pcregrep: Too many command-line patterns (max %d)\n", + MAX_PATTERN_COUNT); + return 2; + } + patterns[cmd_pattern_count++] = option_data; + } + + /* Otherwise, deal with single string or numeric data values. */ + + else if (op->type != OP_NUMBER && op->type != OP_OP_NUMBER) + { + *((char **)op->dataptr) = option_data; + } + else + { + char *endptr; + int n = strtoul(option_data, &endptr, 10); + if (*endptr != 0) + { + if (longop) + { + char *equals = strchr(op->long_name, '='); + int nlen = (equals == NULL)? (int)strlen(op->long_name) : + equals - op->long_name; + fprintf(stderr, "pcregrep: Malformed number \"%s\" after --%.*s\n", + option_data, nlen, op->long_name); + } + else + fprintf(stderr, "pcregrep: Malformed number \"%s\" after -%c\n", + option_data, op->one_char); + exit(usage(2)); + } + *((int *)op->dataptr) = n; + } + } + +/* Options have been decoded. If -C was used, its value is used as a default +for -A and -B. */ + +if (both_context > 0) + { + if (after_context == 0) after_context = both_context; + if (before_context == 0) before_context = both_context; + } + +/* Only one of --only-matching, --file-offsets, or --line-offsets is permitted. +However, the latter two set the only_matching flag. */ + +if ((only_matching && (file_offsets || line_offsets)) || + (file_offsets && line_offsets)) + { + fprintf(stderr, "pcregrep: Cannot mix --only-matching, --file-offsets " + "and/or --line-offsets\n"); + exit(usage(2)); + } + +if (file_offsets || line_offsets) only_matching = TRUE; + +/* If a locale has not been provided as an option, see if the LC_CTYPE or +LC_ALL environment variable is set, and if so, use it. */ + +if (locale == NULL) + { + locale = getenv("LC_ALL"); + locale_from = "LCC_ALL"; + } + +if (locale == NULL) + { + locale = getenv("LC_CTYPE"); + locale_from = "LC_CTYPE"; + } + +/* If a locale has been provided, set it, and generate the tables the PCRE +needs. Otherwise, pcretables==NULL, which causes the use of default tables. */ + +if (locale != NULL) + { + if (setlocale(LC_CTYPE, locale) == NULL) + { + fprintf(stderr, "pcregrep: Failed to set locale %s (obtained from %s)\n", + locale, locale_from); + return 2; + } + pcretables = pcre_maketables(); + } + +/* Sort out colouring */ + +if (colour_option != NULL && strcmp(colour_option, "never") != 0) + { + if (strcmp(colour_option, "always") == 0) do_colour = TRUE; + else if (strcmp(colour_option, "auto") == 0) do_colour = is_stdout_tty(); + else + { + fprintf(stderr, "pcregrep: Unknown colour setting \"%s\"\n", + colour_option); + return 2; + } + if (do_colour) + { + char *cs = getenv("PCREGREP_COLOUR"); + if (cs == NULL) cs = getenv("PCREGREP_COLOR"); + if (cs != NULL) colour_string = cs; + } + } + +/* Interpret the newline type; the default settings are Unix-like. */ + +if (strcmp(newline, "cr") == 0 || strcmp(newline, "CR") == 0) + { + pcre_options |= PCRE_NEWLINE_CR; + endlinetype = EL_CR; + } +else if (strcmp(newline, "lf") == 0 || strcmp(newline, "LF") == 0) + { + pcre_options |= PCRE_NEWLINE_LF; + endlinetype = EL_LF; + } +else if (strcmp(newline, "crlf") == 0 || strcmp(newline, "CRLF") == 0) + { + pcre_options |= PCRE_NEWLINE_CRLF; + endlinetype = EL_CRLF; + } +else if (strcmp(newline, "any") == 0 || strcmp(newline, "ANY") == 0) + { + pcre_options |= PCRE_NEWLINE_ANY; + endlinetype = EL_ANY; + } +else if (strcmp(newline, "anycrlf") == 0 || strcmp(newline, "ANYCRLF") == 0) + { + pcre_options |= PCRE_NEWLINE_ANYCRLF; + endlinetype = EL_ANYCRLF; + } +else + { + fprintf(stderr, "pcregrep: Invalid newline specifier \"%s\"\n", newline); + return 2; + } + +/* Interpret the text values for -d and -D */ + +if (dee_option != NULL) + { + if (strcmp(dee_option, "read") == 0) dee_action = dee_READ; + else if (strcmp(dee_option, "recurse") == 0) dee_action = dee_RECURSE; + else if (strcmp(dee_option, "skip") == 0) dee_action = dee_SKIP; + else + { + fprintf(stderr, "pcregrep: Invalid value \"%s\" for -d\n", dee_option); + return 2; + } + } + +if (DEE_option != NULL) + { + if (strcmp(DEE_option, "read") == 0) DEE_action = DEE_READ; + else if (strcmp(DEE_option, "skip") == 0) DEE_action = DEE_SKIP; + else + { + fprintf(stderr, "pcregrep: Invalid value \"%s\" for -D\n", DEE_option); + return 2; + } + } + +/* Check the values for Jeffrey Friedl's debugging options. */ + +#ifdef JFRIEDL_DEBUG +if (S_arg > 9) + { + fprintf(stderr, "pcregrep: bad value for -S option\n"); + return 2; + } +if (jfriedl_XT != 0 || jfriedl_XR != 0) + { + if (jfriedl_XT == 0) jfriedl_XT = 1; + if (jfriedl_XR == 0) jfriedl_XR = 1; + } +#endif + +/* Get memory to store the pattern and hints lists. */ + +pattern_list = (pcre **)malloc(MAX_PATTERN_COUNT * sizeof(pcre *)); +hints_list = (pcre_extra **)malloc(MAX_PATTERN_COUNT * sizeof(pcre_extra *)); + +if (pattern_list == NULL || hints_list == NULL) + { + fprintf(stderr, "pcregrep: malloc failed\n"); + goto EXIT2; + } + +/* If no patterns were provided by -e, and there is no file provided by -f, +the first argument is the one and only pattern, and it must exist. */ + +if (cmd_pattern_count == 0 && pattern_filename == NULL) + { + if (i >= argc) return usage(2); + patterns[cmd_pattern_count++] = argv[i++]; + } + +/* Compile the patterns that were provided on the command line, either by +multiple uses of -e or as a single unkeyed pattern. */ + +for (j = 0; j < cmd_pattern_count; j++) + { + if (!compile_pattern(patterns[j], pcre_options, NULL, + (j == 0 && cmd_pattern_count == 1)? 0 : j + 1)) + goto EXIT2; + } + +/* Compile the regular expressions that are provided in a file. */ + +if (pattern_filename != NULL) + { + int linenumber = 0; + FILE *f; + char *filename; + char buffer[MBUFTHIRD]; + + if (strcmp(pattern_filename, "-") == 0) + { + f = stdin; + filename = stdin_name; + } + else + { + f = fopen(pattern_filename, "r"); + if (f == NULL) + { + fprintf(stderr, "pcregrep: Failed to open %s: %s\n", pattern_filename, + strerror(errno)); + goto EXIT2; + } + filename = pattern_filename; + } + + while (fgets(buffer, MBUFTHIRD, f) != NULL) + { + char *s = buffer + (int)strlen(buffer); + while (s > buffer && isspace((unsigned char)(s[-1]))) s--; + *s = 0; + linenumber++; + if (buffer[0] == 0) continue; /* Skip blank lines */ + if (!compile_pattern(buffer, pcre_options, filename, linenumber)) + goto EXIT2; + } + + if (f != stdin) fclose(f); + } + +/* Study the regular expressions, as we will be running them many times */ + +for (j = 0; j < pattern_count; j++) + { + hints_list[j] = pcre_study(pattern_list[j], 0, &error); + if (error != NULL) + { + char s[16]; + if (pattern_count == 1) s[0] = 0; else sprintf(s, " number %d", j); + fprintf(stderr, "pcregrep: Error while studying regex%s: %s\n", s, error); + goto EXIT2; + } + hint_count++; + } + +/* If there are include or exclude patterns, compile them. */ + +if (exclude_pattern != NULL) + { + exclude_compiled = pcre_compile(exclude_pattern, 0, &error, &errptr, + pcretables); + if (exclude_compiled == NULL) + { + fprintf(stderr, "pcregrep: Error in 'exclude' regex at offset %d: %s\n", + errptr, error); + goto EXIT2; + } + } + +if (include_pattern != NULL) + { + include_compiled = pcre_compile(include_pattern, 0, &error, &errptr, + pcretables); + if (include_compiled == NULL) + { + fprintf(stderr, "pcregrep: Error in 'include' regex at offset %d: %s\n", + errptr, error); + goto EXIT2; + } + } + +if (exclude_dir_pattern != NULL) + { + exclude_dir_compiled = pcre_compile(exclude_dir_pattern, 0, &error, &errptr, + pcretables); + if (exclude_dir_compiled == NULL) + { + fprintf(stderr, "pcregrep: Error in 'exclude_dir' regex at offset %d: %s\n", + errptr, error); + goto EXIT2; + } + } + +if (include_dir_pattern != NULL) + { + include_dir_compiled = pcre_compile(include_dir_pattern, 0, &error, &errptr, + pcretables); + if (include_dir_compiled == NULL) + { + fprintf(stderr, "pcregrep: Error in 'include_dir' regex at offset %d: %s\n", + errptr, error); + goto EXIT2; + } + } + +/* If there are no further arguments, do the business on stdin and exit. */ + +if (i >= argc) + { + rc = pcregrep(stdin, FR_PLAIN, (filenames > FN_DEFAULT)? stdin_name : NULL); + goto EXIT; + } + +/* Otherwise, work through the remaining arguments as files or directories. +Pass in the fact that there is only one argument at top level - this suppresses +the file name if the argument is not a directory and filenames are not +otherwise forced. */ + +only_one_at_top = i == argc - 1; /* Catch initial value of i */ + +for (; i < argc; i++) + { + int frc = grep_or_recurse(argv[i], dee_action == dee_RECURSE, + only_one_at_top); + if (frc > 1) rc = frc; + else if (frc == 0 && rc == 1) rc = 0; + } + +EXIT: +if (pattern_list != NULL) + { + for (i = 0; i < pattern_count; i++) free(pattern_list[i]); + free(pattern_list); + } +if (hints_list != NULL) + { + for (i = 0; i < hint_count; i++) free(hints_list[i]); + free(hints_list); + } +return rc; + +EXIT2: +rc = 2; +goto EXIT; +} + +/* End of pcregrep */ |