path: root/crawl-ref/docs/level_design.txt

How to make levels for Dungeon Crawl Stone Soup
===============================================

Contents:  A. Introduction
           B. Sample map
           C. Map symbols
           D. Header information
           E. Conditionalising levels
           F. Validating levels
           G. Hints for level makers
           H. Lua reference
           I. Feature names
           J. Map statistics
           K. Portal vaults

A.   Introduction
-----------------

All fixed level information resides in various .des files to be found in
the dat directory. If you are interested in adding some vaults, say, start
with the existing ones and modify them. Currently, the following .des files
are in use:

 altar.des    - minivaults containing altars
 bazaar.des   - entrances to bazaar portal vaults, and bazaars proper
 crypt.des    - Crypt:5, Tomb:1, Tomb:2, Tomb:3
 elf.des      - Elf:7
 entry.des    - entry vaults (each game - but not tutorial games - uses one of
                these premade maps for the vicinity of the entrance)
 float.des    - floating vaults
 hells.des    - hell entrances, Geryon's vestibule, Coc:7, Tar:7, Dis:7, Geh:7
 hive.des     - hive entrances, Hive:4
 lab.des      - labyrinths exits and flavour vaults
 lair.des     - lair entrances, Shoals:5, Swamp:5, Snake:5, Slime:6
 large.des    - all regular vaults which have ORIENT:encompass/northwest etc.
 layout.des   - Level layout code that has been moved from dungeon.cc and
                rewritten in Lua.
 mini.des     - minivaults (no ORIENT line at all)
 orc.des      - orcish mine entrances, orc only vaults
 pan.des      - vaults of the Pan demon lords, Pan minivaults
 portal.des   - portal vaults entrances
 temple.des   - Ecumenical Temples, and Temple entrances
 vaults.des   - entrances for the Vaults, and Vaults:8
 zot.des      - Zot:5


Kinds of Vaults
---------------
The different kinds of vaults used by Crawl are described briefly below. In
most cases, when the dungeon builder places a vault on a level, the rest of the
level (assuming the vault is not a full-map vault) is generated as
rooms+corridors. The only exceptions to this are branch entry vaults and
minivaults, both of which are placed after the rest of the level is generated,
and therefore do not influence level generation.

* Entry vault:

A map designed for D:1, which (usually) contains the primary upstair { and is
always tagged "entry". A player starting a new game will usually land in an
entry vault.


* Branch entry vault, or branch portal vault:

A map containing the entry to a branch - either a branch stair (such as the
stair to the Orcish Mines), or a branch portal (a portal to Hell, say). Always
tagged "<branchname>_entry".


* Special level:

A map for a location of significance in the game, such as the Ecumenical
Temple, or the end of branches such as level 5 of the Snake Pit (Snake:5).
Special level maps usually have a PLACE: attribute.


* Random vaults:

Random vaults may be randomly generated at any level in the dungeon. Random
vault maps are selected by the dungeon builder based on their DEPTH:
attributes.


* Random minivaults:

Random minivaults are small maps that are placed onto a level that the
dungeon builder has already constructed fully otherwise (the level may
include other vaults).

Minivaults are distinguished from normal vaults solely by the absence
of an ORIENT: declaration. Any map without a specified ORIENT: is a
minivault.


B.   Sample Map
---------------

Before going into the technical details of the level-file syntax,
let's look at an example - a branch entry for the Ecumenical Temple -
to see what a map definition looks like.

# name below:
NAME:    a_useless_temple_entry_02
# header section below:
ORIENT:  float
CHANCE:  5
TAGS:    temple_entry
FLAGS:   no_rotate
SHUFFLE: de
SUBST:   1=12.
MONS:    butterfly, plant
ITEM:    stone, w:10 any book / w:90 nothing
# actual map below:
MAP
xx1@2xx
x1wWw2x
ewwOwwd
x2www1x
xx1.1xx
ENDMAP

Every map consists of a name, a header and the actual map (the order
is not important as long as the name comes first, but stick to this
order for consistency).

Lines starting with # are comments. The keywords available are
explained briefly after the example map and in detail in the following
sections.

"ORIENT: float" tells the level builder that this entry can be anywhere on the
                level; other ORIENT: values can force a map to one edge of the
                level.
"CHANCE: 5" makes the map appear less often (default is 10).
"TAGS: temple_entry" turns the 'O' on the map into stairs to the Temple.
"FLAGS: no_rotate" forbids rotation (but mirroring is still allowed).
"SHUFFLE: de" may replace all 'd' with 'e' in the map.
"SUBST: 1=12." may replace each '1' with either '1' or '2' or '.'.
"MONS: butterfly, plant" turns all '1' into butterflies, and '2' into plants.
"ITEM: stone" turns all 'd' into stones.
"ITEM: w:10 any book / w:90 nothing" turns all 'e' into a book
       (with 10% chance) or creates no object (with 90% chance).

The symbols on the map:
 x - rock wall
 w - water (could be deep or shallow)
 W - shallow water
 . - plain floor
 @ - entry point (this square will be connected to the rest of the map)
 O - stairs to the Temple
 1 - first monster from the list (here butterfly) - note the SUBST: 1=12.
 2 - second monster from the list (plant)
 d - first item from the list (here stones)
 e - second item from the list (here occassionally a book)


D.   Map symbols
----------------

Terrain
-------
 x - rock wall                                            (DNGN_ROCK_WALL)
 X - permanent rock wall  - always undiggable        (DNGN_PERMAROCK_WALL)
 c - stone wall - only affected by Shatter               (DNGN_STONE_WALL)
 m - clear rock wall                                (DNGN_CLEAR_ROCK_WALL)
 n - clear stone wall - only affected by Shatter   (DNGN_CLEAR_STONE_WALL)
 o - clear permanent rock wall - always undiggable (DNGN_CLEAR_PERMAROCK_WALL)
 v - metal wall - grounds electricity                    (DNGN_METAL_WALL)
 b - crystal wall - reflects cold and fire       (DNGN_GREEN_CRYSTAL_WALL)
 a - wax wall - can melt                                   (DNGN_WAX_WALL)

 . - floor                                                    (DNGN_FLOOR)
 + - closed door                                        (DNGN_CLOSED_DOOR)
 = - secret door                                        (DNGN_SECRET_DOOR)

 W - shallow water
 w - deep water - can be randomly turned into shallow water by the
     level-builder; you can prevent this conversion with the no_pool_fixup TAG.
     Also, water may automatically receive water creatures! For entry
     vaults, avoid this with the no_monster_gen TAG or KMASK.
 l - lava - again, use the no_monster_gen TAG or KMASK for entry vaults!

Features
--------
 @ - entry point - must be on outside edge. If you use ORIENT: float, and do
     not use any @, the dungeon builder will connect at least one floorspace on
     the edge of your map to the rest of the level; if there is no floorspace
     on the edge of your map, it will be isolated.
 }{ - Stone stairs - You must be able to reach these from each other. The
      { upstair is also the stair on which the player will enter the
      dungeon for entry vaults.
 )( - Stone stairs, set 2.
 ][ - Stone stairs, set 3.

 >< - escape hatches - you can leave the level by these but will usually
      not land on stairs/hatches

 I - orcish idol (does nothing)

 ^ - random trap.
 ~ - random trap suitable for the branch and depth the map is being used.

 A - Vestibule gateway (opened by Horn).
 B - Altar. These are assigned specific types (e.g. of Zin etc) in dungeon.cc,
     in order.
 C - Random Altar.

 F - Usually a Granite Statue, but may be Orange or Silver or Ice (1 in 100)
 G - Granite statue (does nothing) - you can see through but not walk through.
     Also, sight-based effects like smiting work past granite statues, as does
     apportation.

 T - Water fountain
 U - Magic fountain
 V - Permanently dry fountain
 Y - Blood fountain (use sparingly!)

Note: Due to the level maker having seen incremental improvements over
the years, there are some inconsistencies. For examples, dangerous
statues (orange, silver, ice) are now genuine monsters. In particular,
you might see many older vaults still using the deprecated 'H' and 'S'
glyphs which should otherwise be dispensed with.

Also, the most of the other feature glyphs can be replaced with KFEAT:
lines. The same goes for some item glyphs ('R', 'Z') which
could be replaced by KITEM: lines.

Items
-----
 $ - gold
 % - normal item
 * - higher level item (good)
 | - acquirement-level item (almost guaranteed excellent)
 O - place an appropriate rune here. For portal vaults, place the portal here.
 P - maybe place a rune here (50%)
 R - honeycomb (2/3) or royal jelly (1/3)
 Z - the Orb of Zot
 d-k - item array item. See section below on ITEM: arrays for more info.

Monsters
--------
 0 - normal monster
 9 - +5 depth monster
 8 - (+2) * 2 depth monster (aargh!). Can get golden dragons and titans
     this way.
 1-7 - monster array monster. See section below on MONS: arrays for more
     information


D.   Header information
-----------------------

(All declarations apart from NAME: are translated to Lua function
calls behind the scenes. See the Lua reference for more information.)

NAME:     a_string
          Each map must have a unique name. Underscores and digits are ok.

ORIENT:   (float |encompass | north | northwest | ... | southeast)

          Some kind of ORIENT: line is mandatory for vaults; skipping
          ORIENT: makes your map a minivault. As a rule of thumb, if
          you're writing a small random map, skip the ORIENT: line and
          make it a minivault. For special levels and (branch) entry
          vaults, you do need an ORIENT: line.

          * "float": The dungeon builder puts your vault wherever it wants to.
          * "some_direction": The vault lies along that side of the map:
              xxxxxxxxxx       xxxxxxxxxxxxx
              xORIENT:Nx       xORIENT:NW|..
              x.VAULT..x       x.VAULT...|..
              x--------x       x---------|..
              xrest....x       xrest........
              x...of...x       x.....of.....
              x...levelx       x.......level
            ...which brings us to padding. With any some_direction orientation,
            you need 6 layers of x-padding along any level-edge that the vault
            borders. For instance, if your map is ORIENT: north, you must have a
            6 deep border of rock wall (or any other kind of wall) along the
            northern, eastern, and western edges of the map.
          * "encompass": the vault completely occupies the entire level.
            Padding is needed on all 4 sides.

          ORIENT: float vaults need no padding and give a lot of
          flexibility to the dungeon generator; float should generally
          be preferred to other ORIENT: settings for new vaults.


DEPTH:    For random vaults, branch entry vaults, and minivaults, this
          specifies the range of levels where the vault may be placed
          in the dungeon. E.g.

            DEPTH: 7-20

          DEPTH: does not force a map to be placed in a particular place; it
          applies only when the dungeon builder is looking for a random vault
          or minivault, so you can control at what depths your vault gets
          placed.

          A simple DEPTH: declaration that does not specify a branch
          applies to all branches. A map declared with depth 7-20 could
          be used in the Lair, for instance. (Lair:1 will be treated as
          a depth of 12 if the Lair entrance is on D:11.)

          You can constrain a map by branch:

            DEPTH: Lair:7-9

          (Anywhere between levels 7-9 of the Lair, inclusive.)

          You can apply multiple constraints in one DEPTH line,
          comma-separated:

            DEPTH: 7-20, !12-14

          (Anywhere in the dungeon between depths 7-20, but not on levels
          12-14.)

            DEPTH: 7-20, !Orc

          (Anywhere in the dungeon between depths 7-20, but never in the Orcish
          Mines.)

            DEPTH: Lair:*

          (Anywhere in the Lair. Can also be expressed as "DEPTH: Lair".)

          Maps that do not specify a DEPTH: attribute will inherit their depth
          constraints from the closest preceding default-depth: line. If there
          is no preceding default-depth directive in the .des file, the map will
          have no DEPTH: constraint. Note that maps without a DEPTH: constraint
          cannot be selected as random vaults or minivaults.

CHANCE:   (number with 10 being default)
          For entry vaults and any other vaults randomly picked from among
          a set, this type of line affects the likelihood of the given vault
          being picked in a given game. The default CHANCE: is 10. The
          likelihood of a vault getting picked is:
          [vault's CHANCE: / sum of all CHANCE:s of vaults of that type]

PLACE:    Used to specify certain special levels. Existing special levels are:
          Temple, Hell, Dis:7, Geh:7, Coc:7, Tar:7, Hive:4, Vault:8, Snake:5,
          Elf:7, Slime:6, Blade, Zot:5, Tomb:1, Tomb:2, Tomb:3, Swamp:5.

          PLACE can also be used to specify arbitrary places, like D:3, which
          will force the map (or one of the maps with PLACE: D:3) to be picked
          when D:3 is generated.

          PLACE cannot be used to specify places in the Abyss, Pandemonium,
          or Labyrinths.

          PLACE can be used with random vaults and minivaults for testing them.

TAGS:     Tags go an a TAGS: line and are space-separated. Valid tags are:
          * "allow_dup": Vaults are normally used only once per game. If you
             have a vault that can be used more than once, use allow_dup to tell
             the dungeon builder that the vault can be reused.
          * "dummy": this tag indicates that the vault is a stub; if the dungeon
             builder picks a dummy vault, it pretends no vault was selected.
             Dummies are used to reduce the probability of other vaults at the
             same depth / place.
          * "entry": this tag MUST be there for a vault to be pickable as an
             entry vault.
          * "generate_awake": Monsters placed (using MONS, KMONS) in this vault
             will be generated awake.
          * "patrolling": Monsters placed (using MONS, KMONS) in this vault
             will be generated with their starting position as patrol point.
             If not otherwise occupied (fighting, seeking) they will patrol
             the area.
          * "no_item_gen": Prevents random item generation in the vault.
             Items explicitly placed by the vault are not affected.
          * "mini_float": applicable only to minivaults, requests that
             the dungeon builder pick random exits from the minivault and
             connect it to the rest of the level, similar to the exit behaviour
             for floating vaults.
          * "no_monster_gen": Prevents random monster generation at the time of
             the vault's creation. Highly advised for entry vaults with a
             player-hostile geography, MUST-HAVE for those with water/lava.
             Can be applied only to particular symbols with KMASK.
          * "no_pool_fixup": prevents water squares next to land from being
             randomly converted from deep water (the default) to shallow.
          * "branch_entry" eg. "orc_entry", "lair_entry" etc.
             If chosen, these maps will contain the stairs for that
             branch. Use "O" to place the stairs. If a branch has very
             few entries, a dummy entry is advisable to make sure the
             player doesn't get bored of the same few entries recycled
             ad nauseam.
          * "mnoleg" or the name of some other pandemonium lord. This makes
             the map eligible for said pan lord's lair. See pan.des.
          * "minotaur" turns this into a labyrinth exit vault. 
            "lab" turns this into an additional labyrinth flavour vault.
            See lab.des for examples and details.
          * "uniq_BAR": (uniq_ with any suffix) specifies that only one of
             the vaults with this tag can be used in a game.
          * "no_rotate":  Normally, the dungeon builder can, at its whim,
             rotate your vault. This flag tells it, "hey, don't do that to my
             vault!"
          * "no_hmirror": Like no_rotate, but for horizontal mirroring.
          * "no_vmirror": Like no_rotate, but for vertical mirroring.
          * "layout": Lua code that dungeon.cc uses for generating level
             layouts.  Do *NOT* use or mess with unless you know what
             you're doing.
          * "layout_foo": Indicates what sort of level layouts this vault is
             compatible with, for vaults that don't fit in with all layouts;
             the absence of this type of tags means it can go with any layout.
             Multiple layout_foo tags can be used if it can be used with
             multiple layouts.  Current values for "foo" are: rooms, city,
             open, caves, cross, shoals, swamp, labyrinth (though currently
             random vaults aren't placed in the last three).

          Pre-0.3 Crawl distinguished between TAGS and FLAGS. 0.3 and
          newer Crawls treat TAGS and FLAGS as synonyms.

LFLAGS:   Persistent, changeable per-level flags which affect game
          behavior (FLAGS just controls how the vault is placed); should
          only be used for vaults with ORIENT encompass or with PLACE.
          This causes a level's flags to be set when the level is first
          created. These flags can later be altered using Lua markers;
          see the slime pit vault in lair.des, and the vaults in hell.des
          and elf.des for examples.

          Valid flags are: no_tele_control, which prevents the player
          from using teleport control; not_mappable, which prevents
          the player from remembering where they've been (like in
          the Abyss), and no_magic_map, which prevents magic mapping
          from working.

BFLAGS:   Persistent, changeable per-*branch* flags which affect game
          behavior; should only be used for vaults which go on the fist
          level of a particular branch. These flags can later be altered
          using Lua markers; see the Tomb vaults in vaults.lua for an
          example.

          Valid flags are: no_tele_control, which prevents the player
          from using teleport control; not_mappable, which prevents
          the player from remembering where they've been (like in
          the Abyss), and no_magic_map, which prevents magic mapping
          from working.

FLOORCOL: blue
          FLOORCOL: allows you to set the floor colour for the level
          the vault appears in. Should only be used for bazaars and
          other portal vaults.

ROCKCOL:  yellow
          ROCKCOL: allows you to set the colour of rock walls for the
          level the vault appears in. Should only be used for bazaars and
          other portal vaults.

ITEM:     (list of items, separated by comma)
          These are used to help place specified items at specific places
          within a vault. They create an array with up to 8 positions. What's
          in the first position in the array will be used when the dungeon
          builder sees a "d" in the vault definition, the second will be used
          for "e"s, etc. Positions are comma-separated; several ITEM: lines
          are possible as well. The following defines letters 'd' - 'g':
            ITEM: stone, ring mail, meat ration, ring of hunger

          Positions can contain multiple possibilities, one of which the
          builder will choose randomly. Separate such multiple possibilities
          using a slash. Note that "nothing" (without the quotes) is a valid
          possibility. The random choice is done for each individual occurence
          of the letter. You can also give possibilities a "weight," which
          affects their chance of being picked. The default weight is 10. You
          can abbreviate "weight:30" by "w:30". The chance to pick a
          possibility is
          [possibility's weight: / sum of all weight:s in that array position]

          For example, the following line makes letter 'd' into a bread ration
          with 50% chance, or apple or orange with 25% chance each:

            ITEM: bread ration / w:5 apple / w:5 orange

          Modifiers:
          * "q:N" sets the item quantity to N (if N > 0). Does nothing
             if the item is not stackable.
          * "no_uniq" prevents the item from being turned into an artefact.
          * "good_item" makes the builder try to make the item a good one
            (acquirement quality). 
          * "level:N" sets the object's item level (can't be used with
            "good_item").  If set to -2 then the object's item level will
            be the same as a "*" symbol item (five plus twice the
            vault's level number).
          * "any" by itself gives a random choice; you can combine "any" with
            "good_item."
          * "any book", "any misc" etc. gives a random item of that class.
             Valid item class names are: gold, weapon, missile, armour,
             wand, food, scroll, jewelry, potion, book, staff, orb,
             misc, carrion. All of these are usable in map definitions,
             apart from "orb" and "carrion".
          * "race:race_name", where "race_name" is "elven", "dwarven"
             or "orcish"; it can also be "none" or "no_race" to prevent
             the item from being randomly being made racial.  Has no effect
             if the item can't take that kind of racial setting.
             NOTE: Can result in a non-racial item if used with "any" and
             the chosen item isn't compatible with the desired race.
          * "ego:ego_name", where "ego_name" is something like
            "running", "fire_resistance", and so on; "none" can be used
            to prevent the item from getting an ego.  The item must
            be fully specified, so trying "any weapon ego:vorpal" or
            "any armour ego:positive_energy" will result in an error.
            Trying to give an ego to something which can't accept an
            ego will also result in an error.

            WARNING: While checks are done to make sure that an armour
            ego isn't given to a weapon, a weapon ego to a missile,
            and so on, and also to make sure that egos are only given
            to amrours, weapons and missiles, no other checking is
            done.  Thus it is possible to create a demonic weapon of
            holy wrath or a helmet of running.
 
          Limitations: You can't specify curse status, specificy
          pluses or number of charges, force a randart or give fixedarts.
          You also can't lay down corpses, skeletons, or chunks.

MONS:     (list of monsters)
          These are used to help place specific monsters at specific places
          in a vault. They create an array with up to 7 positions. What's in
          the first position in the array will be used when the dungeon
          builder sees a "1" in the vault definition, the second for "2,"
          etc. Note that if, for example, you place a 3 on the map, but your
          MONS: line has no third position, the 3 will be filled with
          RANDOM_MONSTER.
          You can use weights as for ITEM: lines.

          Individual monsters may be prefixed with the "generate_awake"
          (without the quotes). Use this sparingly:
              MONS: generate_awake giant beetle

          Individual monsters may be prefixed with the "patrolling"
          (without the quotes). Use this sparingly:
              MONS: patrolling naga guardian

          Monsters can also be given colours that override their default
          colour. Use this *very* sparingly:
              MONS: col:darkgrey fungus

          Note that 8, 9, 0 also place monsters (see the table).

          A monster can be given specific items by following the monster
          name with a semi-colon and then with an item list as described
          in ITEM:, but with slashes replaced with pipes and commas replaced
          with periods.  For example:
              MONS: orc ; katana | quick blade . chain mail | scale mail

          will generate an orc wielding either a katana or a quick blade
          and wearing either a chain mail or a scale mail.  Randarts are
          never generated, and ego items are only generated if the ego
          is explicitly stated.  Note that any items that the monster was
          originally generated with will be removed and destroyed.  This
          can be used to force a monster to have no items whatsoever:
              MONS: orc; nothing

          Items given to an orc or an elf will be made orcish or elven
          unless the item's race type is explicitly set otherwise.

          Limitations: If an item in the item list has alternatives,
          there's no way to force all monsters dervied from that monster
          spec to choose the same alternative.  If a monster is given
          a random launcher, there is no way to force the ammo type to
          match the launcher type.

COLOUR:   . = green / blue:5 / red / none
          COLOUR: allows you to attach explicit colours to any feature.
          Explicit colours will override the default colour for that
          feature. The example shown above colours all . (floor) in the
          map green, blue, red, or unchanged (use the default colour).

          You can use : to specify that all glyphs get the same colour:
          COLOUR: x : red / blue
          will colour all rock walls in the map red, or all rock
          walls blue.

          COLOUR: should be used very sparingly, and only for features
          where it won't cause confusion (i.e.: never re-colour features
          like lava!)

SHUFFLE:  def, 12/3?
          This allows you to randomly permute glyphs on the map. There are
          two ways:

          SHUFFLE: 123w     (i.e. list of glyphs, NOT slash-separated)
          could, for example, swap all occurences of "1" with "2", as well as
          swapping all "3" with "w" (or any other of the 24 possibilities).

          SHUFFLE: 12/3w    (i.e. list of slash-separated blocks of same size)
          will either do nothing or swap all "1" with "3" and then also swap
          "2" with "w" everywhere.

          Several SHUFFLE: lines can be used, and mixed with SUBST:, and the
          shuffles and substitutions will be applied in order. You can also
          put multiple SHUFFLEs on one line, comma-separated. Shuffles cannot
          use , or /. All spaces are stripped before shuffling.

SUBST:    ?=xc, !:bv, 1=2 1:100
          The SUBST: directive allows you to specify a placeholder symbol
          that is replaced with a random glyph from a set. For instance:

          SUBST: ? = TUV
          replaces occurrences of ? with one of TUV. Since whitespaces are
          irrelevant, this is the same as
          SUBST: ? = T U V

          SUBST: ? = T:20 U V
          makes T twice as likely to be used as U or V (the default weight
          is 10). Note that there has to be at least one space before and
          after T:20 and that whitespace in T:20 is not permitted.

          SUBST: ? : TUV
          replaces occurrences of ? with one of TUV, and guarantees that all
          occurrences of ? will get the same replacement symbol.

          The placeholder and replacement symbols can be any non-space,
          printable character, including : and =, apart from commas. For
          example, the following is valid:
          SUBST: = = +=:123def"

          SUBST: lines can safely replace symbols with themselves, as in:
          SUBST: w = wW

          Multiple SUBST: lines can be used, and mixed with SHUFFLE:, and
          will be applied in order. Multiple substitutions can be performed
          on one line, using commas.

NSUBST:   ? = 3:w / *:l

          NSUBST is similar to SUBST, replacing placeholders with
          replacement values. Unlike SUBST, however, it allows you to
          replace different instances of the same placeholder with
          completely different substitutions. For instance:

          ? = 3:w / *:l

          replaces three occurrences (randomly selected) of ? with w
          and all others with l.

          You can use complex SUBST specifications:

          ? = 3= w .:15 A / *: =+CF

          This is equivalent to SUBST: ? = w .:15 A for three ? and
          SUBST: ? : =+CF for all the others.

          You can use any number of NSUBST specifiers:

          ? = wW / l / A / 1234

          Each specifier is preceded by the number of symbols to apply
          it to, followed by : or = (: to use one substitution for all
          occurrences, = to randomly pick for each occurrence). If you
          omit the initial N: or N=, then 1= is assumed, except for the
          last spec where *= is assumed.

KFEAT:    Z = C / needle trap / antique armour shop / altar_zin
          The KFEAT: directive allows you to specify a placeholder symbol
          that is replaced with another symbol, named feature, trap, or
          shop. For example, the line above will replace occurrences of Z
          with C (random altar), a needle trap, an antique armour shop, or
          an altar of Zin. Different instances of Z may receive different
          replacements. To force a single replacement for all Z,  use:

          KFEAT: Z : C / needle trap / antique armour shop

          You'll notice that 'Z' is the symbol of the Orb of Zot. Kxxx
          directives allow you to assign arbitrary definitions to any symbol.

          KFEAT features are specified as a feature name (see section I
          for a full list of feature names). As another example, you can
          place a portal to the Abyss as:

          KFEAT: A = enter_abyss

          If you want no feature as an option in a KFEAT line, use '.' or
          'floor'. If you do not want to specify the type of shop, use
          'any shop' or 'random shop'.

          The placeholder used by KFEAT can be shared by KITEM and KMONS;
          see below. If the placeholder is shared, all defined Kxxxx
          operations for the placeholder are performed. Also, all Kxxx
          lines accept weights as for MONS or ITEM.

KMONS:    ? = orc priest / w:3 deep elf priest

          KMONS: allows you to specify a placeholder symbol that indicates
          the position of a monster (or monsters).
          Using KMONS: allows you to exceed the 7 slot limit for monsters.
          It is also useful if you want to place a monster on a non-floor
          square (used in association with a KFEAT:). For example,
            KFEAT: Z = W
            KMONS: Z = rat
          places a rat on a shallow water square for all occurrences of Z.

          KMONS: also allows you to specify alternative monsters if the
          primary monster you want to place is unavailable (because it
          is a unique that was already generated). For instance, if you want
          to generate one of Terence, Michael or Erica or a generic human
          (whoever is available, in that order, you can use):
            KMONS: n = Terence, Michael, Erica, human
          Or if you want to pick randomly:
            KMONS: n = Terence / Michael / Erica, human

KMASK:    Z = no_monster_gen

          KMASK allows you set or unset various masks for particular
          symbols, rather than for the entire vault like if you did it
          with TAGS. Valid masks are

          * "no_item_gen":   Prevents random item on that symbol. Items
             explicitly placed on that symbol aren't affected.
          * "no_monster_gen": Prevents random monster generation on that
             symbol. MUST-HAVE for those with water/lava symbols in
             entry vaults.
          * "no_pool_fixup": prevents a water square next to land from being
             randomly converted from deep water (the default) to shallow.
          * "no_secret_doors": prevents a door from randomly being turned
             into a secret door.

          For example

            KMASK: W = no_monster_gen

          will prevent monsters from randomly being generated on shallow
          water squares. Note that if shuffling and substitutions cause
          W to end up as water 10% of the time and floor 90% of the time,
          then those floor squares will still have no_monster_gen set, but
          that's still a higher degree of control than you get with TAGS.

          If TAGS has been used to set a mask for the entire vault, you
          can use KMASK to remove that mask from particular symbols.
          For instance:

            TAGS:  no_monster_gen
            KMASK: W = !no_monster_gen

          would make it so that monsters are only randomly generated
          on shallow water squares.

KITEM:    ? = potion of healing / potion of restore abilities
          KITEM: places the specified item at all occurrences of the
          placeholder. It can be combined with KFEAT: and KMONS: lines for
          the same placeholder.

          You can use "gold" or "$" to place gold:
            KITEM: ? = nothing / gold
            KITEM: ? = nothing / $

          You can use q: to specify quantities:
            KITEM: ? = q:100 gold

          KITEM: allows you to place multiple items on the same square:
            KITEM: ? = bread ration, potion of water, potion of porridge

MARKER:   A = feat:<feature_name> or lua:<marker_expr>

          A marker ties a square on the map to a game-trigger of some
          sort (which depends on the marker and what feature it is on).

          The portals to the Hells in the Vestibule of Hell are each
          annotated with feature markers like this:

          MARKER: D=feat:enter_dis, G=feat:enter_gehenna

          When the horn is sounded, the stone arch at D becomes the
          portal to Dis, the arch at G becomes the portal to Gehenna,
          etc. This behaviour applies only to the Vestibule of Hell.

          Lua markers are used for more complex triggers, such as for
          bazaar and labyrinth gates, rune pickup triggers for
          the branches of Hell, fog generators, etc.

          Here's a Lua marker that creates a cloud generator:

          MARKER:  A = lua:fog_machine { \
                       pow_max = 15, delay_min = 100, delay_max = 150, \
                       size = 1, size_buildup_amnt = 29, \
                       size_buildup_time = 1000 }

          For a full explanation of the various paramenters, read the
          header of dat/clua/lm_fog.lua.

          Feature names used in markers must be names matching the
          names in the source code. There's a full list of feature
          names in section I (Feature names) at the end of this
          document.

          An important thing to note with markers is that they are
          also considered map transforms along with SUBST, NSUBST and
          SHUFFLE. You usually want to place a MARKER line after all
          SUBST, NSUBST and SHUFFLE lines so that the final position
          of the marker key is used. For instance, if you want to
          attach a marker to the rune in a map when you're randomising
          the position of the rune, this is a mistake:

          MARKER: O = lua:<expr>
          SHUFFLE: Oa/|c

          because the marker will be placed at O (the rune), then O
          may be shuffled to a different position. The correct order
          in this case is:

          SHUFFLE: Oa/|c
          MARKER: O = lua:<expr>



E.    Conditionalising levels
-----------------------------

Crawl translates level (.des) files into Lua code chunks and runs
these chunks to produce the final level that is generated. While you
don't need to use Lua for most levels, using Lua allows you to
conditionalise or randomise levels with greater control.

Let's take a simple example of randomisation:

NAME: random_test
# Put it on D:1 so it's easy to test.
PLACE: D:1
ORIENT: float
MAP
xxxxxxxxxxxxxxxxxxx
x........{........x
xxxAxxxxxBxxxxxCxxx
xxx.xxxxx.xxxxx.xxx
xxx@xxxxx@xxxxx@xxx
ENDMAP

Now let's say you want A, B, and C to be randomly rock or floor, but B
should be floor if both A and C are rock. Here's one way to do it (add
these lines to the map definition):

: local asolid, csolid
: if crawl.random2(2) == 0 then
:   asolid = true
:   subst("A = x")
: else
:   subst("A = .")
: end
: if crawl.random2(2) == 0 then
:   csolid = true
:   subst("C = x")
: else
:   subst("C = .")
: end
: if asolid and csolid then
:   subst("B = .")
: else
:   subst("B = .x")
: end

This code uses crawl.random2(N) which returns a number from 0 to N-1
(in this case, returns 0 or 1). So we give A a 50% chance of being
rock, and the same for C. If we made both A and C rock, we force B to
be floor, otherwise we use a subst that gives B the same 50% chance of
being rock.

You can conditionalise on various factors, such as player experience
level:

NAME: condition_002
DEPTH: 1-27
ORIENT: float
: if you.xl() > 18 then
MONS: greater mummy
: else
MONS: deep elf priest / deep elf sorcerer / deep elf demonologist
: end
MAP
xxxxxx
x1...x
x1...+
x1...x
xxxxxx
ENDMAP

Or based on where the map is being generated:

NAME: condition_003
DEPTH: Elf:*, Orc:*
ORIENT: float
: if you.branch() == "Orc" then
MONS: orc priest, orc high priest
: else
MONS: deep elf priest, deep elf high priest
: end
MAP
xxxxxx
x1...x
x2...+
x1...x
xxxxxx
ENDMAP

When conditionalising maps, remember that your Lua code executes in
two contexts:

1) An initial compilation phase before the game starts.
2) The actual mapgen phase when the dungeon builder is at work.

In context (1), you will not get useful answers from the Crawl Lua API
in general, because the game hasn't started. This is generally
ignorable (as in the case above) because the compilation phase just
checks the syntax of your Lua code. If you conditionalise your map,
however, you may run into compile failures. Take this variant, which
(incorrectly) attempts to conditionalise the map:

NAME: condition_004
DEPTH: Elf:*, Orc:*
ORIENT: float
: if you.branch() == "Orc" then
MONS: orc priest, orc high priest
MAP
xxxxxx
x1...x
x2.I.+
x1...x
xxxxxx
ENDMAP
: elseif you.branch() == "Elf" then
MONS: deep elf priest, deep elf high priest
MAP
xxxxxx
x1...x
x2.U.+
x1...x
xxxxxx
ENDMAP
: end

This map will break the compile with the cryptic message "Must define
map." (to compound the confusion, the line number for this error will
be the first line number of the map following the buggy map).

This error is because although the map is Elf or Orc only, at compile
time, the branch is *neither* Elf nor Orc, so the level-compiler
thinks you've neglected to define a map.

Lua code can detect the compile phase using crawl.game_started() which
returns true only when the player has started a game (and will return
false when the map is being initially compiled).

For more details on the available Lua API and syntax, see the Lua
reference section.


F.    Validating levels
-----------------------

If you have a map with lots of transforms (SUBST and SHUFFLE), and
want to guarantee that the map is sane after the transforms, you can
use a validation hook.

To take a very contrived example:

NAME: contrived_001
PLACE: D:2
ORIENT: float
TAGS: no_pool_fixup
SUBST: .=.w
SUBST: c=x.
MAP
xxxxxx
x{.+.c
x..+>x
xxxxxx
ENDMAP

This map has a chance of leaving the player stuck on the upstair
without access to the rest of the level if the two floor squares near
the doors are substituted with deep water (from the SUBST line), or
the 'c' glyph is substituted with rock. Since a cut-off vault is
uncool, you can force connectedness with the rest of the level:

validate {{ return has_exit_from_glyph('{') }}

The has_exit_from_glyph() function returns true if it is possible to
leave the vault (without digging, etc.) from the position of the {
glyph. (This takes things like the merfolk ability to swim into
account, so a merfolk character may see deep water between the stair
and door.)

The validate Lua returns false (or nil) to indicate that the map is
invalid, which will force the dungeon builder to reapply transforms
(SUBST and SHUFFLE) and validate the map again. If the map fails
validation enough times, the dungeon builder will discard the entire
level and retry (this may cause a different map to be selected,
bypassing the buggy map).

Going back to the example, if you just want to ensure that the player
can reach the > downstair, you can use:

validate {{ return glyphs_connected('{', '>') }}

NOTE: You cannot use the colon-prefixed syntax for validation Lua. If
you have a big block of code, use the multiline syntax:

validate {{
    -- This level is always cool.
    crawl.mpr("This level is guaranteed perfect!")
    return true
}}


G.    Hints for level makers
----------------------------

* Technical stuff:

  If your map is not a minivault or a floating vault, make sure the
  side(s) forming the border have a rock wall padding at least 6 deep. For
  instance, if your map is ORIENT: north, you must have a 6 deep border of
  rock wall (or any other kind of wall) along the northern, eastern, and
  western edges of the map. If you're doing a fullscreen map (encompass),
  you must pad all around the map with 6 layers of wall.

  You do not have to place all of the stairs unless the level is full
  screen, in which case you must place all except the extra stairs (> and
  <). The <> stairs can be put anywhere and in any quantities but do not
  have to be there. Any of the other stairs which are not present in the
  vault will be randomly placed outside it. Also generally try to avoid
  rooms with no exit (use at least > or < to make it possible for players
  to get away).

  Minivaults can use explicit @ exits, or be completely surrounded by
  one space of floor for accessibility. Alternatively, you can request
  that the dungeon builder pick appropriate exits as it does for
  floating vaults by using the "mini_float" tag.

  The entry point '@' must be present for all vaults (except
  full-screen vaults where it must not, and floating vaults and
  minivaults where it is optional). All @ will be connected to floor
  space in the rest of the map (multiple @ close together may merge
  into the same exit corridor). Make sure that no part of your entry
  level can be cut off! If no @ is present in a floating vault (and
  there are no doors on the edge of the map, see below), the level
  builder will use one or more random floor spaces '.' or doors at the
  circumference as exits. Note that it is not possible to predict
  which spaces the level builder will choose to connect; if you need
  predictability, use explicit @ exits on the edge.

  The level-builder will also implicitly treat doors and secret doors
  on the edge of a map as explicit exits (the same as using @) and
  connect them to the rest of the level.

  Not using @ and allowing the level-builder to pick exits is
  acceptable in floating vaults, but when you use no @'s with this
  feature in mind, please add comments stating this - else somebody
  may just add @'s later on. :)

  Non-rectangular maps will be padded (to the right) with rock walls
  (or with floor spaces for minivaults) for the smallest rectangle
  containing them. Unfortunately.

  Entry levels should be rather small. Their intention is to provide some
  atmosphere for the starting room, not to get a grip on the whole of D:1.
  Minivaults should be rather small, as well, in order to increase the
  chances they may actually be chosen during level generation.

* Randomise!
  The level making syntax is now very supportive for making a single map
  appear in many versions. Use the SHUFFLE: and SUBST: directives and look
  at the existing entry vaults. Besides reducing tedium, this avoids giving
  veterans a spoiled edge. For example, if a secret chamber with loot is
  always at the same place, it's a no-brainer for those who know. The same
  goes for traps. This is much less so if there are several places for the
  chamber (or trap) and there's even a chance it doesn't exist.

  You can also use CHANCE to create modified versions of the same map. In
  order to do this, make several maps and endow each with a chance such
  that the sum of chances add up to 10.

  Randomisation does not just apply to layout: you could also have
  different monster population sets (for example make a branch end skewed
  for either melee or ranged opponents), or perhaps couple difficulty to
  loot.

* Not too much loot.
  For example, entry vaults should in general have very little loot - in
  particular no good_xxx or '*' items lest they might give incentive for
  start-scumming. For random vaults, there needn't be loot at all and, in
  any case, there shouldn't be too much of it. Compare with the branch ends
  rich in treasure (Tomb:3, Cocytus etc.) to get a feeling for this.

* Have a theme.
  It is often worthwhile (to me at least) to have a theme in mind before
  making the actual level. For entry vaults, something simple like
  'fortress' or  'forest' may be enough. For later (or larger) maps, try
  to think of distinguishing features your map may have. Being cool can
  be good enough, but possessing some gameplay value (for example by being
  easier for particular skills/capabilities like ranged attacks or
  necromancy or Traps & Doors) is even better.

* Testing your maps.
  This is easy for entry vaults. Temporarily introducing a CHANCE: 5000
  will make your entry appear almost always. For other vaults, you can
  for the moment declare them as entry vaults with a huge CHANCE: as
  above (and preferably in wizard mode). For more intricate things like
  new branch ends, you have to resort to wizard mode and use the &~ command
  to go directly to the place where the map is used, say Snake:5. You may want
  to use a high CHANCE: again, if the map has alternatives (like Snake:5, or
  Coc:7). Minivaults can also be tested by adding a PLACE: to the definition,
  which makes it very likely that the minivault will appear in the chosen
  level.

  Larger vaults can be conjured up in wizard mode using the &L command.
  You don't need to specify the full name of the vault, a substring which
  uniquely determines the vault is enough. You can playtest portal vaults
  using the &P wizard command. Branch ends can be conveniently tested with
  the &~ command.

  If the .des file syntax is incorrect, Crawl will tell you on which line of
  which des file it found the syntax error, making for easier debugging.

* Be fair!
  Crawl is hard but try to balance your monsters. While it is true that Orc:1
  can show an orcish knight, this is very rare. Hence it's probably a bad idea
  to use orcish knights for an entry to the Orcish Mines.

  Phrased more generally, do not use OOD (out-of-depth) monsters unless you
  really know what you want.

  Be especially fair when creating entry vaults. If your entry is too hard,
  it might get just trashed. Keep in mind that your vault will be played
  very very often, so even small chances of something stupid happening
  (like creation of a really nasty monster) will kick in often enough.

* Minivaults vs. random vaults.
  Minivaults are handled very differently from regular vaults and special
  levels. They're placed *after* normal map generation, whereas normal
  vaults are placed before generating the rest of the level. There's no
  way to guarantee generation of a minivault on a particular level, although
  using a PLACE: attribute makes the dungeon builder try very hard to place
  the minivault on the specified level. Regular vaults can always be forced to
  appear using a PLACE: attribute.

  Technically, you make a minivault like a normal floating vault but
  without an ORIENT: line. Note that minivaults used to be exclusively of
  size 12x12 but this restriction is gone. Still, the smaller the better.

  Where possible, use minivaults instead of regular vaults, because the dungeon
  builder has greater freedom with the rest of the level layout when using
  minivaults.

* levdes.vim.
  If you use vim, the levdes.vim syntax highlighting script (provided
  in the dat directory) can make level-editing far more pleasant by colouring
  different features in maps and syntax-highlighting .des-file syntax. vim is
  available for nearly all operating systems, including Windows.


H.    Lua reference
-------------------

How maps are processed
----------------------

Crawl uses Lua heavily when dealing with .des files:

* Level files are compiled into a series of Lua chunks. Each map can
  have one or more Lua chunks associated with it: the prelude, the
  body, and a validation chunk. The body is mandatory, but prelude and
  validation chunks are necessary only if your map needs validation or
  fancy selection criteria.

* When first compiling a .des file, Crawl compiles each map's Lua
  chunks, then compiles and runs the prelude, body and validation
  immediately to verify that the Lua code is not broken. Lua errors at
  this stage will cause Crawl to exit with an error message (hopefully
  relevant). Note that the validation Lua chunk's return code is
  completely ignored at this stage - it is only run to check for
  syntax errors in the code.

* When a new game is started, Crawl will run the Lua preludes for all
  maps (most maps should have no prelude - map preludes slow the game
  down). At this point, preludes can change the map's placement or
  availability.

* When the dungeon builder selects a map (based on TAGS, DEPTH,
  PLACE), it re-runs the map prelude and the map body, applies
  transforms (SUBST, SHUFFLE) if any, then calls the map's validation
  Lua. If the map passes validation, the dungeon builder continues
  with level-generation; otherwise, it restarts from the map prelude.

The global prelude
------------------

Every .des file can have (at the start of the file) Lua code that is
not associated with any specific map, but with all maps in the file.
This is called the global prelude. The global prelude is run before
running any other Lua code in the file, once during compilation, and
once at start of game.

You can use the global prelude to define functions and set up globals
that the rest of the maps in the .des file use. If you have a lot of
common code, you should probably add it to dungeon.lua instead.

Syntax for using Lua in .des files
----------------------------------

* Colon-prefixed lines are individual Lua lines, extending to the end
  of the line. E.g.

   : crawl.mpr("Hello")

  Colon-prefixed lines are always in the main Lua chunk, unless they occur
  before any map definitions, in which case they go to the global prelude.

* Lua blocks for the main (body) Lua
   lua {{ <code> }}
  or
   lua {{
       <code>
   }}

NOTE: Colon-prefixed lines, or lua {{ }} blocks defined before any
map's NAME: directive will add the Lua code to the global prelude.

* Lua blocks for the prelude:
   prelude {{ <code> }}
  or
   prelude {{
       <code>
   }}

* Lua blocks for the validate chunk:
   validate {{ <code> }}
  or
   validate {{
       <code>
   }}


Debugging Lua
-------------

Since Lua action happens in the guts of Crawl, it can be hard to tell
what's going on. Lua debugging involves the time-honoured method of
peppering your code with print statements:

* Use error() or print() for compile-time work (i.e. when Crawl reads
  the .des file). Note that print() just writes to the terminal and
  keeps going, while error() forces Crawl to exit immediately (at
  compile time; errors during level-generation are handled
  differently).

* Use crawl.mpr() for output when the game has started (at
  level-generation time).

It's very important that your finished level never croaks during
level-generation. A Lua error at this stage is considered a validation
failure.


Lua API reference
-----------------
a. The Map.
b. Global game state.
c. Character information.


Lua API - the Map
-----------------

Lua functions dealing with the map are mostly grouped under the "dgn"
module. For convenience, .des file Lua chunks are run in an environment
such that function calls written as:

 fn(x, y, ...)

are translated to

 dgn.fn(map, x, y, ...)

where "map" is the reference to the map that the currently executing
Lua chunk belongs to. This is only for Lua chunks that belong to a
map, Lua code in the global prelude does not get this treatment
(because the global prelude is not associated with any map).

Functions in the dgn module:

default_depth, name, depth, place, tags, tags_remove, chance, weight,
orient, shuffle, shuffle_remove, subst, subst_remove, map, mons, item,
kfeat, kitem, kmons, grid, points_connected, gly_point, gly_points,
original_map, glyphs_connected, orig_glyphs_connected, orig_gly_point,
orig_gly_points, load_des_file, feature_number, feature_name,
dgn_event_type, register_listener, remove_listener, remove_marker,
num_matching_markers, feature_desc, feature_desc_at, item_from_index,
mons_from_index, change_level_flags, change_branch_flags



Lua API - global game state
---------------------------

The "crawl" module provides functions that describe the game state or
provide utility methods.

mpr, mesclr, random2, coinflip, one_chance_in, redraw_screen,
input_line, c_input_line, getch, kbhit, flush_input, sendkeys,
playsound, runmacro, bindkey, setopt, msgch_num, msgch_name, regex,
message_filter, trim, split, game_started, err_trace, args


Lua API - character information
-------------------------------

The "you" module provides functions that describe the player character.

turn_is_over, spells, abilities, name, race, class, god, hp, mp,
hunger, strength, intelligence, dexterity, xl, exp, res_poison,
res_fire, res_cold, res_draining, res_shock, res_statdrain,
res_mutation, res_slowing, gourmand, levitating, flying, transform,
stop_activity, floor_items, where, branch, subdepth, absdepth


I.   Feature Names
------------------

These are the feature names usable in MARKER declarations:

unseen, rock_wall, stone_wall, closed_door, metal_wall, secret_door,
green_crystal_wall, orcish_idol, wax_wall, permarock_wall,
silver_statue, granite_statue, orange_crystal_statue,
statue_reserved_1, statue_reserved_2, lava, deep_water, shallow_water,
water_stuck, floor, exit_hell, enter_hell, open_door, trap_mechanical,
trap_magical, trap_iii, undiscovered_trap, enter_shop,
enter_labyrinth, stone_stairs_down_i, stone_stairs_down_ii,
stone_stairs_down_iii, escape_hatch_down, stone_stairs_up_i,
stone_stairs_up_ii, stone_stairs_up_iii, escape_hatch_up, enter_dis,
enter_gehenna, enter_cocytus, enter_tartarus, enter_abyss, exit_abyss,
stone_arch, enter_pandemonium, exit_pandemonium, transit_pandemonium,
builder_special_wall, builder_special_floor, enter_orcish_mines,
enter_hive, enter_lair, enter_slime_pits, enter_vaults, enter_crypt,
enter_hall_of_blades, enter_zot, enter_temple, enter_snake_pit,
enter_elven_halls, enter_tomb, enter_swamp, enter_shoals,
enter_reserved_2, enter_reserved_3, enter_reserved_4,
return_from_orcish_mines, return_from_hive, return_from_lair,
return_from_slime_pits, return_from_vaults, return_from_crypt,
return_from_hall_of_blades, return_from_zot, return_from_temple,
return_from_snake_pit, return_from_elven_halls, return_from_tomb,
return_from_swamp, return_from_shoals, return_reserved_2,
return_reserved_3, return_reserved_4, enter_portal_vault,
exit_portal_vault, altar_zin, altar_shining_one, altar_kikubaaqudgha,
altar_yredelemnul, altar_xom, altar_vehumet, altar_okawaru,
altar_makhleb, altar_sif_muna, altar_trog, altar_nemelex_xobeh,
altar_elyvilon, altar_lugonu, altar_beogh, fountain_blue,
fountain_sparkling, fountain_blood, dry_fountain_blue, 
dry_fountain_sparkling, dry_fountain_blood, permadry_fountain


J.   Map Statistics
-------------------

Full-debug Crawl builds (this does not include normal Crawl builds
that have wizard-mode) can produce map generation statistics. To
generate statistics, run crawl from the command-line as:

crawl -mapstat

This will generate 100 Crawl dungeons and report on the maps used in a
file named "mapgen.log" in the working directory.

You can change the number of dungeons to generate:

crawl -mapstat 10

Will generate 10 dungeons. If you merely want statistics on the
probabilities of the levels, use:

crawl -mapstat 1


K.   Portal Vaults
------------------

Portal vaults are vaults accessed by portals in the dungeon (bazaars
are a special case of portal vaults). You can create custom portal
vaults as follows:

Define a vault to hold the portal itself:

# Bare-bones portal vault entry
NAME: portal_generic_entry
TAGS: allow_dup
ORIENT: float
MARKER: O = lua:one_way_stair { desc = "A portal to places unknown", \
                                dst = "generic_portal" }
KFEAT: O = enter_portal_vault
MAP
O
ENDMAP

Portal entries must contain a portal vault entry (enter_portal_vault).
This feature must always have a marker that provides the portal with a
description ("A portal to places unknown") and a destination
("generic_portal").

This will produce a portal, but attempting to use it will trigger an
ASSERT since there's no map for the destination. So we create a
destination map like so:

NAME: portal_generic_generic
# Tag must match dst value of portal in entry.
TAGS: generic_portal allow_dup
ORIENT: encompass
MONS: ancient lich
KFEAT: > = exit_portal_vault
MAP
xxxxxxxxxxx
x111111111x
x1A111111>x
x111111111x
xxxxxxxxxxx
ENDMAP

Note that the entry point into the map will be a stone arch. You must
provide an exit to the dungeon explicitly (KFEAT: > =
exit_portal_vault) or the player will not be able to leave.

Stairs will not work right in portal vaults, do not use them.

You can use multiple maps with the destination tag (generic_portal),
and the dungeon builder will pick one at random.